Schneider Electric

Schneider Electric LTMR100PBD Motor controller, TeSys T, Motor Management, Profibus DP, 6 logic inputs, 3 relay logic outputs, 5 to 100A, 24VDC

(No reviews yet) Write a Review
SKU:
LTMR100PBD
MPN:
LTMR100PBD
Condition:
New
Load Current:
5 A 250 V AC logic output || 5 A 30 V DC logic output
Short-Circuit Withstand:
100 kA conforming to EN/IEC 60947-4-1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Standards:
CSA C22.2 No 14 || EN 60947-4-1 || IEC 60947-4-1 || IACS E10 || UL 508
Maximum Operating Rate:
1800 cyc/h
Pvc Free:
Yes
Contacts Type And Composition:
1 NO + 1 NC fault signal || 3 NO
Permissible Power:
480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Mechanical Robustness:
vibrations mounted on symmetrical rail1 Gn, 5...300 Hz EN/IEC 60068-2-6 || vibrations plate mounted4 Gn, 5...300 Hz EN/IEC 60068-2-6 || shocks half sine wave acceleration15 Gn for 11 ms EN/IEC 60068-2-27
Operating Altitude:
<= 6561.68 ft (2000 m) without derating
Halogen Content Performance:
Halogen free plastic parts product
Device Short Name:
LTMR
Maximum Operating Frequency:
2 Hz
[Uimp] Rated Impulse Withstand Voltage:
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1 || 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1
Current State 0 Guaranteed:
logic input < 5 V <= 15 mA 5 ms
Ambient Air Temperature For Operation:
-20-60°C
Ip Degree Of Protection:
IP20
Bus Type:
Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, SUB-D 9 2 shielded twisted pairs, type A || Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, terminal block 2 shielded twisted pairs, type A
Depth:
122.5 mm
Warranty:
18 months
Rohs Exemption Information:
Yes
Protective Treatment:
12 x 24 hour cycles EN/IEC 60068-2-30 || 48 h EN/IEC 60070-2-11 || TH EN/IEC 60068
Measurement Current:
5-100 A
Associated Fuse Rating:
4 A gG output || 0.5 A gG control circuit
Country of Origin:
China
Measurement Accuracy:
5...15 % earth fault current internal measurement || 1 % voltage 100...830 V) || 3 % power factor || 5 % earth fault current external measurement || +/- 30 min/year internal clock || 0,02 Temperature || 5 % active and reactive power || 0,02 current
Metering Type:
imbalance current || temperature || average current Iavg || phase current I1, I2, I3 RMS || earth-fault current
Environmental Disclosure:
ENVPEP060308EN_V2
Product Certifications:
CSA || C-tick || DNV || RMRoS || ATEX || EAC || RINA || CCC || KERI || GL || NOM || UL || LROS (Lloyds register of shipping) || ABS || BV
Communication Port Protocol:
Profibus DP
Fire Resistance:
650°C EN/IEC 60695-2-12 || 960°C UL 94
Overvoltage Category:
III
Range:
TeSys
Compatibility Code:
LTMR
Eu Rohs Directive:
Compliant with Exemptions
Device Application:
equipment monitoring and control
[Ui] Rated Insulation Voltage:
690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508
Product Name:
TeSys T
Current State 1 Guaranteed:
logic input < 15 V 2...15 mA 15 ms
Supply Voltage Limits:
20.4-26.24 V DC
Net Weight:
0.53 kg
Connection Pitch:
5.08 mm
Height:
61 mm
Mercury Free:
Yes
Logic Input Number:
6
Web Services:
web server
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Connections - Terminals:
control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm² AWG 24...AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible without cab
$850.00

Description

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 5 to 100 amperes. 24 VDC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.
View AllClose