Schneider Electric

Schneider Electric LTMR27PFM Motor controller, TeSys T, Motor Management, Profibus DP, 6 logic inputs, 3 logic outputs, 1.35 to 27A, 100 to 240VAC

(No reviews yet) Write a Review
SKU:
LTMR27PFM
MPN:
LTMR27PFM
Condition:
New
[Uimp] Rated Impulse Withstand Voltage:
4 kV supply, inputs and outputs EN/IEC 60947-4-1 || 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1
Circularity Profile:
ENVEOLI100411EN_V2
Protection Type:
load fluctuation || thermal protection || locked rotor || reverse polarity protection || phase unbalance || earth-leakage protection || overload (long time) || thermal overload protection || overload || phase failure || power factor variation
Product Certifications:
BV || CSA || CCC || EAC || NOM || KERI || ABS || RMRoS || LROS (Lloyds register of shipping) || UL || RINA || DNV || GL || C-tick || ATEX
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Compliant with Exemptions
Warranty:
18 months
Rohs Exemption Information:
Yes
Fire Resistance:
650°C EN/IEC 60695-2-12 || 960°C UL 94
Network And Machine Diagnosis Type:
phase fault and earth fault trip counters || trip history information || trip context information || motor control command recording || running hours counter/operating time || waiting time after overload tripping || remaining operating time before ov
Short-Circuit Withstand:
100 kA conforming to EN/IEC 60947-4-1
Current State 0 Guaranteed:
logic input 0...40 V <= 15 mA 25 ms
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Load Current:
5 A 250 V AC logic output || 5 A 30 V DC logic output
Operating Altitude:
<= 6561.68 ft (2000 m) without derating
Maximum Operating Frequency:
2 Hz
Mercury Free:
Yes
Tightening Torque:
control circuit 0.5-0.6 N.m flat 3 mm
Country of Origin:
China
Permissible Power:
480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Net Weight:
0.53 kg
Product Name:
TeSys T
Depth:
122.5 mm
Bus Type:
Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, SUB-D 9 2 shielded twisted pairs, type A || Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, terminal block 2 shielded twisted pairs, type A
Environmental Disclosure:
ENVPEP060308EN_V2
Range:
TeSys
Contacts Type And Composition:
1 NO + 1 NC fault signal || 3 NO
Logic Input Number:
6
Input Current:
3.1 mA 100 V || 7.5 mA 240 V
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pvc Free:
Yes
Connections - Terminals:
control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm² AWG 24...AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible without cab
Supply Voltage Limits:
93.5-264 V AC
Weight:
0.53 kg
Measurement Current:
1.35-27 A
Device Application:
equipment monitoring and control
Product Or Component Type:
motor controller
Overvoltage Category:
III
Ip Degree Of Protection:
IP20
Metering Type:
average current Iavg || temperature || earth-fault current || phase current I1, I2, I3 RMS || imbalance current
Ambient Air Temperature For Operation:
-20-60°C
Web Services:
web server
Connection Pitch:
5.08 mm
Current State 1 Guaranteed:
logic input 79...264 V >= 2 mA 25 ms
Halogen Content Performance:
Halogen free plastic parts product
$750.00

Description

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 1.35 to 27 amperes. 120 to 240 VAC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.
View AllClose