Schneider Electric

Schneider Electric LV851001SP Embedded Ethernet interface EIFE, MasterPact MTZ1/MTZ2/MTZ3 drawout, spare part

(No reviews yet) Write a Review
SKU:
LV851001SP
MPN:
LV851001SP
Condition:
New
Mercury Free:
Yes
Product Or Component Type:
Ethernet interface module
Weight:
0.075 kg
Maximum Supply Current:
0.125
Range:
MasterPact
Ambient Air Temperature For Operation:
-20-70°C
Device Application:
communication
Depth:
52.5 mm
Localisation On Device:
chassis
Communication Network Type:
ULP, CANopen USB || Ethernet, Ethernet TCP/IP 10/100 Mbps RJ45
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
IEC 60947-6-2 || IACS E10 || IEC 60950
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Range Compatibility:
Masterpact MasterPact MTZ2 circuit breaker || Masterpact MasterPact MTZ3 circuit breaker
Mounting Support:
DIN rail
Mounting Mode:
drawout
Eu Rohs Directive:
Compliant
Offer Type:
spare part
Provided Equipment:
1 instruction sheet
Web Server:
embedded
Product Certifications:
EAC || CE || FCC
Device Mounting:
embedded
Circularity Profile:
ENVEOLI2305013EN
Country of Origin:
France
Environmental Disclosure:
ENVPEP2305013EN
Net Weight:
0.075 kg
Power Consumption In W:
72 W
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Warranty:
18 months
Ip Degree Of Protection:
IP30
Communication Gateway:
Ethernet TCP/IP to Modbus
$3,262.50

Description

This EIFE is an embedded Ethernet interface module designed for MasterPact MTZ drawout circuit breakers. It provides a single Ethernet access and gets all data delivered by Masterpact MTZ control unit. It monitors the three positions of the circuit breaker when inserted in its chassis (IN, OUT, TEST). The data flow is 10/100 Mbps for a simple daisy chain connection. The connection to EIFE interface requires a ULP communication port installed on the chassis of MasterPact MTZ. The EIFE is mounted on MasterPact MTZ chassis DIN rail, and is connected to the ULP port by an ULP cable (not supplied). The EIFE power supply is provided by the ULP port through the ULP cable. There are two RJ45 sockets for the connection to Ethernet network. The EIFE is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The EIFE firmware can be updated using EcoStruxure Power Commission software.
View AllClose

Related Products

Related Products