Schneider Electric

Schneider Electric LV851200SP Embedded Ethernet interface EIFE, MasterPact MTZ2/MTZ3 drawout, spare part

(No reviews yet) Write a Review
SKU:
LV851200SP
MPN:
LV851200SP
Condition:
New
Product Certifications:
CE || FCC || EAC
Range:
MasterPact
Ambient Air Temperature For Operation:
-20-70°C
Product Or Component Type:
Ethernet interface module
Web Server:
embedded
Communication Network Type:
ULP, CANopen USB || Ethernet, Ethernet TCP/IP 10/100 Mbps RJ45
Mounting Mode:
drawout
Mercury Free:
Yes
Circularity Profile:
ENVEOLI2305013EN
Mounting Support:
DIN rail
Offer Type:
spare part
Localisation On Device:
chassis
Device Application:
communication
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Eu Rohs Directive:
Compliant
Standards:
IEC 60947-6-2 || IEC 60950 || IACS E10
Weight:
0.075 kg
Ip Degree Of Protection:
IP30
Device Mounting:
embedded
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Country of Origin:
France
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Provided Equipment:
1 instruction sheet
Communication Gateway:
Ethernet TCP/IP to Modbus
Power Consumption In W:
72 W
Maximum Supply Current:
0.125
Range Compatibility:
Masterpact MasterPact MTZ2 circuit breaker || Masterpact MasterPact MTZ3 circuit breaker
Condition Of Use:
with specific accessories
Depth:
52.5 mm
Environmental Disclosure:
ENVPEP2305013EN
Net Weight:
0.075 kg
$3,375.00

Description

This EIFE is an embedded Ethernet interface module designed for MasterPact MTZ2/3 drawout circuit breakers. It provides a single Ethernet access and gets all data delivered by Masterpact MTZ2/3 control unit. It monitors the three positions of the circuit breaker when inserted in its chassis (IN, OUT, TEST). The data flow is 10/100 Mbps for a simple daisy chain connection. The connection to EIFE interface requires a ULP communication port installed on the chassis of MasterPact MTZ2/3. The EIFE is mounted on MasterPact MTZ2/3 chassis DIN rail, and is connected to the ULP port by an ULP cable (supplied). The EIFE power supply is provided by the ULP port through the ULP cable. There are two RJ45 sockets for the connection to Ethernet network. The EIFE is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The EIFE firmware can be updated using EcoStruxure Power Commission software.
View AllClose

Related Products

Related Products