null
Schneider Electric LXM28EU10M3X Lexium28 EtherCAT drive, 1.0kW, 1/3 phase 230V

Schneider Electric LXM28EU10M3X Lexium28 EtherCAT drive, 1.0kW, 1/3 phase 230V

Schneider Electric
SKU:
LXM28EU10M3X
$932.54
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 7A, nominal power of 1kW and continuous power of 1000W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 170mm (depth) x 150mm (height). It weighs 1.2kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 1 motor stack) at 1000W and servo motor (100mm, 1 motor stack) at 1000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Additional Information
Output Current 3S Peak 2:
21 A 220 V
Type Of Cooling:
fan
Mercury Free:
Yes
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Electrical Connection:
spring terminal 1.3...1.5 mm², AWG 16 L1-L2) || spring terminal 1.3...1.5 mm², AWG 16 R, S, T) || spring terminal 1.3...1.5 mm², AWG 16 U, V, W, PE) || spring terminal 1.3...1.5 mm², AWG 16 PA/+, PBe)
Discrete Output Logic:
positive or negative CN1)
Discrete Output Voltage:
12...24 V DC
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Discrete Input Logic:
positive or negative CN1)
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Communication Interface:
EtherCAT, Integrated
Supply Voltage Limits:
200-255 V three phase || 170-255 V single phase
Relative Humidity:
5-95 % without condensation
Rohs Exemption Information:
Yes
Output Current 3S Peak:
21 A 220 V
Transmission Rate:
100 Mbit/s EtherCAT
Reach Free Of Svhc:
Yes
Circularity Profile:
ENVEOLI1409001EN
Continuous Output Current:
7 A 16 kHz
Product Certifications:
cULus || CE || CSA
Marking:
CE || cULus
Net Weight:
1.2 kg
Continuous Power:
1000 W 220 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Overvoltage Category:
III
Connector Type:
RJ45 CN4)EtherCAT
Supply Frequency:
50/60 Hz - 5...5 %
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Output Voltage:
<= power supply voltage
Type Of Cable:
shielded motor cable 0-55°C) copper
Status Led:
1 LED (Red) DC bus energized || 1 LED (multi-colour) N.RUN || 1 LED (multi-colour) N.ERR || 2 LEDs (Green) Link (Link Status) || 2 LEDs (Yellow) activity
Discrete Output Number:
5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Network Frequency:
47.5...63 Hz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Country of Origin:
China
Method Of Access:
slave
Format Of The Drive:
compact housing
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Emc Filter:
without EMC filter
Signaling Function:
servo status and fault codes five 7-segment display units
Nominal Power:
1 kW 220 V 16 kHz
Weight:
1.2 kg
Ambient Air Temperature For Storage:
-25-65°C
Physical Interface:
RS485 Modbus Serial line slave
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Related Products