Schneider Electric

Schneider Electric LXM28EU30M3X Lexium28 EtherCAT drive, 3.0kW, 3 phase 230V

(No reviews yet) Write a Review
SKU:
LXM28EU30M3X
MPN:
LXM28EU30M3X
Condition:
New
Supply Voltage Limits:
200-255 V three phase || 170-255 V single phase
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Connector Type:
RJ45 CN4)EtherCAT
Product Certifications:
CE || CSA || cULus
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Standards:
IEC 61800-5-1
Operating Position:
vertical
Depth:
186 mm
Control Signal Type:
servo motor encoder feedback CN2
Product Compatibility:
servo motor BCH2 180 mm, 2 3000 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Net Weight:
3.2 kg
Reach Free Of Svhc:
Yes
Ambient Air Temperature For Storage:
-25-65°C
Overvoltage Category:
III
Shock Resistance:
10 gn, type I IEC 60721-3-3
Signaling Function:
servo status and fault codes five 7-segment display units
Discrete Input Number:
8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Country of Origin:
China
Circularity Profile:
ENVEOLI1409001EN
Product Or Component Type:
motion servo drive
Emc Filter:
without EMC filter
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Operation:
0-55°C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Range Of Product:
Lexium 28
Line Current:
11.8 A 155.8 % 220 V, three phase
Network Frequency:
47.5...63 Hz
Pvc Free:
Yes
Environmental Disclosure:
ENVPEP1409001EN
Device Short Name:
LXM28E
Switching Frequency:
8 kHz
Sustainable Offer Status:
Green Premium product
Output Voltage:
<= power supply voltage
Output Current 3S Peak 2:
60 A 220 V
Marking:
CSA || CE || cULus
Transmission Rate:
100 Mbit/s EtherCAT
Discrete Input Logic:
positive or negative CN1)
Method Of Access:
slave
Discrete Output Voltage:
12...24 V DC
Physical Interface:
RS485 Modbus Serial line slave
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Supply Frequency:
50/60 Hz - 5...5 %
Reach Regulation:
Free of Substances of Very High Concern above the threshold
$1,751.56

Description

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 19.8A, nominal power of 3kW and continuous power of 3000W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 116mm (width) x 186mm (depth) x 234mm (height). It weighs 3.2kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (180mm, 2 motor stacks) at 3000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
View AllClose