Schneider Electric LXM28SU04M3X motion servo drive, Lexium 28, sercos, single and three phase, 200 to 240V, 400W
Schneider Electric
$855.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LXM28SU04M3X motion servo drive, Lexium 28, sercos, single and three phase, 200 to 240V, 400W
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features an HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. The motion servo drives embed one pulse-train-input PTI and one pulse train-output PTO interfaces. It is a motion servo drive with a rated supply voltage of 220V (single phase and three phase), an output current of 2.6A at 220V, a power of 400W/0.53HP and a continuous power of 400W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for Sercos integrated communication interface. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with motor BCH2 (60mm, 2 motor stacks) at 400W, BCH2 (80mm, 1 motor stacks) at 400W, BCH2 (130mm, 1 motor stacks) at 300W. Mount this servo drive in a vertical position (more or less 10°). This is required for cooling the device. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 motors, optimized servo bundles for compact machines.
- Depth:
- 146 mm
- Supply Frequency:
- 50/60 Hz - 5...5 %
- Electrical Isolation:
- between power and control
- Pvc Free:
- Yes
- Network Frequency:
- 47.5...63 Hz
- Line Current:
- 3.8 A 211.6 % 220 V, single phase || 3.8 A 183.7 % 220 V, three phase
- Electromagnetic Compatibility:
- conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
- Output Current 3S Peak:
- 7.8 A 220 V
- Operating Position:
- vertical
- Protection Type:
- against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
- Communication Interface:
- Modbus, Integrated || SERCOS III, Integrated
- Overvoltage Category:
- III
- Signaling Function:
- servo status and fault codes five 7-segment display units
- Range Of Product:
- Lexium 28
- Type Of Cable:
- shielded motor cable 0-55°C) copper
- Discrete Input Logic:
- positive or negative CN1)
- Environmental Disclosure:
- ENVPEP1409001EN
- Safety Function:
- STO (safe torque off), Integrated
- Ip Degree Of Protection:
- IP20
- Connector Type:
- RJ45 CN3) || RJ45 CN4)
- Continuous Output Current:
- 2.6 A 16 kHz
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Vibration Resistance:
- 3M4 3 mm 9-200 Hz)IEC 60721-3-3
- Transmission Rate:
- 9600 bauds...115200 bauds (automatic detection) 100-100 m
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Nominal Power:
- 0.4 kW 220 V 16 kHz
- Electrical Connection:
- spring terminal 0.82...1 mm², AWG 18 L1-L2) || spring terminal 0.82...1 mm², AWG 18 R, S, T) || spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) || spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
- Rohs Exemption Information:
- Yes
- Mercury Free:
- Yes
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
- China Rohs Regulation:
- X
- Discrete Input Number:
- 8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
- Output Current 3S Peak 3:
- 7.8 A 220 V
- Standards:
- IEC 61800-5-1
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Height:
- 150 mm
- Discrete Output Number:
- 4 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
- [Us] Rated Supply Voltage:
- 200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
- Marking:
- CSA || CE || cULus
- Ambient Air Temperature For Operation:
- 0-55°C
- Width:
- 55 mm
- Weight:
- 1 kg
- Circularity Profile:
- ENVEOLI1409001EN
- Method Of Access:
- slave
- Phase:
- three phase || single phase
- Output Current 3S Peak 2:
- 7.8 A 220 V
- Emc Filter:
- without EMC filter
- Discrete Output Voltage:
- 12...24 V DC
- Switching Frequency:
- 16 kHz
