Schneider Electric

Schneider Electric LXM28SU20M3X motion servo drive, Lexium 28, sercos, single and three phase, 200 to 240V, 2kW

(No reviews yet) Write a Review
SKU:
LXM28SU20M3X
MPN:
LXM28SU20M3X
Condition:
New
Ambient Air Temperature For Operation:
0-55°C
Connector Type:
RJ45 CN3) || RJ45 CN4)
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Overvoltage Category:
III
Output Current 3S Peak 3:
36 A 220 V
Relative Humidity:
5-95 % without condensation
Discrete Output Logic:
positive or negative CN1)
Network Frequency:
47.5...63 Hz
Mercury Free:
Yes
Type Of Cooling:
integrated fan
Ip Degree Of Protection:
IP20
Supply Voltage Limits:
200-255 V three phase
Method Of Access:
slave
Shock Resistance:
10 gn, type I IEC 60721-3-3
Sustainable Offer Status:
Green Premium product
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Weight:
1.7 kg
Output Current 3S Peak:
36 A 220 V
Phase:
three phase
Environmental Disclosure:
ENVPEP1409001EN
Continuous Power:
2000 W 220 V
Line Current:
8.7 A 137.1 % 220 V, three phase
Discrete Input Number:
8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Range Of Product:
Lexium 28
Supply Frequency:
50/60 Hz - 5...5 %
Emc Filter:
without EMC filter
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Standards:
IEC 61800-5-1
Depth:
184 mm
Product Compatibility:
servo motor BCH2 130 mm, 4 2000 W || servo motor BCH2 100 mm, 2 2000 W || servo motor BCH2 180 mm, 1 2000 W
Signaling Function:
servo status and fault codes five 7-segment display units
Marking:
CE || CSA || cULus
China Rohs Regulation:
X
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Reach Free Of Svhc:
Yes
Output Voltage:
<= power supply voltage
Product Certifications:
cULus || CSA || CE
Maximum Leakage Current:
1.35 mA
Output Current 3S Peak 2:
36 A 220 V
Continuous Output Current:
12 A 8 kHz
[Us] Rated Supply Voltage:
200...240 V - 10...15 %)three phase
Safety Function:
STO (safe torque off), Integrated
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Discrete Input Logic:
positive or negative CN1)
Width:
62 mm
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Storage:
-25-65°C
$975.00

Description

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features an HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. The motion servo drives embed one pulse-train-input PTI and one pulse train-output PTO interfaces. It is a motion servo drive with a rated supply voltage of 220V (single phase and three phase), an output current of 36A at 220V, a power of 2000W/2.68HP and a continuous power of 2000W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for Sercos integrated communication interface. It is an IP20 rated product. Its dimensions are 62mm (Width) x 170mm (Depth) x 184mm (Height). It weighs 1.7kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with motor BCH2 (130mm, 4 motor stacks) at 2000W, BCH2 (100mm, 2 motor stacks) at 2000W, BCH2 (180mm, 1 motor stacks) at 2000W. Mount this servo drive in a vertical position (more or less 10°). This is required for cooling the device. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 motors, optimized servo bundles for compact machines.
View AllClose