Schneider Electric

Schneider Electric METSEEM403336 EM4000 multi-circuit energy meter, 24 x 333 mV inputs, 277V control power 60 Hz

(No reviews yet) Write a Review
SKU:
METSEEM403336
MPN:
METSEEM403336
Condition:
New
Device Mounting:
wall mounted
Ambient Air Temperature For Operation:
-40-70°C
Device Application:
sub billing
Standards:
FCC Part 15 class B || ICES-003 || IEC 6100-4-5 || CSA C22.2 No 61010-1-4 || ANSI/TIA-968-A : 2002 || CSA C22.2 No 61010-1 || EN 55022
Type Of Measurement:
current per phase, rms || negative active energy || voltage per phase, rms || negative reactive energy || apparent energy || pulse count || active and reactive power || apparent power || positive active energy || positive reactive energy
Measurement Voltage:
80-480 V without PTs || 480-999000 V with external PTs
Ambient Air Temperature For Storage:
-40-70°C
Messages Display Capacity:
2 lines of 16 characters
Energy Management:
billing analysis || sub billing and cost allocation
Measurement Accuracy:
+/- 0.5 % of the measuring range
Display Type:
Backlit LCD
Depth:
5.5 cm
Communication Of Data:
voltage || negative active energy || positive active energy || positive reactive energy || negative reactive energy || apparent energy
Weight:
4 kg
Pollution Degree:
2
Mounting Mode:
wall mount
Power Monitoring:
basic instrumentation
Country of Origin:
Switzerland
Product Name:
PowerLogic EM4000
Sampling Rate:
256 samples/cycle
Communication Port Support:
RJ45 ETHERNET || RS485
Device Short Name:
EM4033
Operating Altitude:
<= 9842.52 ft (3000 m)
Network Frequency:
60 Hz
Type Of Installation:
indoor installation || enclosed outdoor
Eu Rohs Directive:
Under investigation
Relative Humidity:
90-90 % 40-40°C
Enclosure Type:
NEMA type 1
Product Or Component Type:
multi-circuit energy meter
Number Of Inputs:
2 pulse
Net Weight:
4 kg
Communication Port Protocol:
BACnet IP || FTP || HTTP || Modbus TCP/IP || SNTP
Range:
PowerLogic
Power Quality Analysis:
compliance monitoring
[Us] Rated Supply Voltage:
277 V AC 60 Hz
Product Certifications:
UL
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Analogue Input Type:
solid core CT 0.333 V24 x single pole || solid core CT 0.333 V12 x single phase || solid core CT 0.333 V8 x three phase || split core CT 0.333 V24 x single pole || split core CT 0.333 V12 x single phase || split core CT 0.333 V8 x three phase
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
$7,354.15

Description

This multi-circuit power meter is part of the PowerLogic EM4000 Series. This compact multi-circuit energy meter enables reliable metering of building electrical loads with a low installation cost-per-point. It combine revenue-accurate electricity sub-metering with advanced communications technology. It is ideal for departmental metering applications and M&V within office, condominiums, malls and other multi-user environments. This version monitor up to 24 tenants with a single device, combined with 0.333 volt split or solid core current transducer. Designed for 120 (phase neutral) or 208 volts (phase phase) networks, working at 60 Hz. Measurement accuracy is plus or minus 0.5 %, compliant with ANSI C12.1 and C12.20 Class 0.5 ; IEC 62053-22 Class 0.5S. The printed board is installed in a Type 1 black enclosure, with an integrated backlit LCD display, 2 lines, on the door. Mechanical dimensions are 335 mm in width, 305 mm in height and 55 mm in depth ; for 4 kg.
View AllClose