Schneider Electric

Schneider Electric METSEION7413 Power quality meter, PowerLogic ION7400, Standard, transducer, 512 MB, 256 s/c

(No reviews yet) Write a Review
SKU:
METSEION7413
MPN:
METSEION7413
Condition:
New
Data Recording:
sequence of event recording || trending/forecasting || harmonics logs || time stamping || GPS synchronisation || waveform logs || min/max of instantaneous values || sag and swell logs || data logs || event logs || alarm logs || 50 data recorders
Height:
90.5 mm
Ambient Air Temperature For Operation:
-25-70°C
Mounting Support:
DIN rail
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Power Consumption In W:
17 W
Communication Port Support:
ETHERNET || screw terminal block RS485 || mini B USB USB
Eu Rohs Directive:
Compliant with Exemptions
Installation Category:
III
Sustainable Offer Status:
Green Premium product
Memory Capacity:
512 MB
China Rohs Regulation:
X
Net Weight:
528 g
Power Quality Analysis:
EN 50160 2010 compliance report || IEEE 519 2014 compliance report || IEC 61000-4-30 class S power quality measurement || up to the 63rd harmonic || harmonic distortion || waveform capture || voltage sag and swell detection || programmablity (lo
Rohs Exemption Information:
Yes
Variant:
standard
Environmental Disclosure:
ENVPEP1512006EN
Web Services:
customizable home page || file upload/download via FTP || file upload/download via SFTP || web server || alarm notification by e-mail || viewing of captured waveform (FTP) || viewing of captured waveform (web) || HTTPS server
Measurement Current:
50-10000 mA
Device Short Name:
ION7413
Circularity Profile:
ENVEOLI1512006EN
Weight:
528 g
Electromagnetic Compatibility:
electrostatic discharge conforming to IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test conforming to IEC 61000-4-4 || surge immunity test confor
Communication Network Type:
IPv6 (internet protocol)
Product Certifications:
CE || cULus || N998
Product Or Component Type:
power meter
Information Displayed:
voltage || current || frequency || power || energy consumption || harmonic distortion
Standards:
IEC 61326-1 || IEC 62053-22 || IEC 62053-24 || IEC 62052-11 || IEC 61557-12 || IEEE 1588 || IEC 62586
Sampling Rate:
256 samples/cycle
Communication Port Protocol:
Modbus RTU 115 kbauds - 2-wire || ION 115 kbauds - 2-wire || DNP3 || IEC 61850 || Modbus TCP/IP || Ethernet Modbus TCP/IP daisy chain 10/100 Mbit/s || RSTP 801.1d 2004 || DLMS
Measurement Voltage:
57-400 V AC 42...69 Hz between phase and neutral || 100-690 V AC 42...69 Hz between phases
Relative Humidity:
5-95 %
Ip Degree Of Protection:
IP30 conforming to IEC 60529
Mounting Mode:
clip-on
Display Type:
Without Display
Frequency Measurement Range:
42-69 Hz
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Width:
90.5 mm
Accuracy Class:
class 0.2S active energy IEC 62053-22 || class 0.2 active energy ANSI C12.20 || class 0.2 active power IEC 61557-12 || class 0.5S reactive energy IEC 62053-24 || class 0.5 power factor IEC 61557-12 || class 0.2 voltage IEC 61557-12 || class 0.2 curre
Product Name:
PowerLogic ION7400
Type Of Measurement:
current || voltage || frequency || active and reactive power total || apparent power total || power factor total || active and reactive power per phase, rms || apparent power per phase, rms || power factor per phase, rms || active and reactive energy
Line Rated Current:
10 A || 1 A || 5 A
Ambient Air Temperature For Storage:
-40-85°C
[Us] Rated Supply Voltage:
20...60 V DC +/- 10 %
Isolation Voltage:
III400-690 V conforming to IEC 61010-1:ed. 3 || III400-690 V conforming to EN 61010-1:ed. 3 || III347-600 V conforming to UL 61010-1:ed. 3 || III347-600 V conforming to CSA C22.2 No 61010-1:ed. 3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Operating Altitude:
9842.52 ft (3000 m)
Poles Description:
1P + N || 3P || 3P + N
Communication Service:
NTP time synchronization || SMTP e-mail notification || RSTP support || DHCP || SNMP || PTP time synchronization
Country of Origin:
United States
$8,032.37

Description

PowerLogic ION7400 utility feeder power meters combine capabilities not typically available in compact meters. They offers a hight flexibility and usability, along with accurate 3-phase energy and power measurements with data logging. Use Power Monitoring Expert software for data analysis or share operation data with SCADA systems through multiple communication channels and protocols. Certified by third party labs for energy accuracy (IEC 62052-11, IEC 62052-22, IEC 62052-24) and power quality (IEC 62586-2, IEC 61000-4-30 Class S). Cybersecurity features include secure protocols (HTTPS, SFTP), security event logging, Syslog protocol. Ability to enable/disable communication ports, and 16 user configurable accounts. With 512 MB of memory to support 50 data logs, 50+ user-definable alarms, waveform captures, 1/2 cycle RMS logging, custom web pages, min/max logs, energy trends, and Time of Use. The ability to timestamp events to +/-1 ms utilizing time synchronization method that include PTP (IEEE1588), NTP, IRIG-B, GPS ASCII (RS485) and network time set function. 3 digital inputs and one digital output. I/O option modules include 2 relays and 6 digital inputs or 2 analog outputs and 4 analog inputs. Wide control power range of 20-60 VDC. Operating environment of -25 to +70C; Humidity rating of 5% to 95%; Altitude up to 3000 m. DIN rail mounting (no display).
View AllClose

Related Products

Related Products