Schneider Electric

Schneider Electric METSEPM5340 power meter PowerLogic PM5340, ethernet, up to 31st Harmonic, 256KB 2DI/2DO 35 alarms

(No reviews yet) Write a Review
SKU:
METSEPM5340
MPN:
METSEPM5340
Condition:
New
Power Quality Analysis:
up to the 31st harmonic
Poles Description:
3P || 1P + N || 3P + N
Circularity Profile:
ENVEOLI1305025
Number Of Inputs:
2 digital
Rohs Exemption Information:
Yes
Number Of Outputs:
2 relay || 2 digital
Country of Origin:
India
Ambient Air Temperature For Operation:
-25-70°C meter || -20-70°C display || -25--20°C with reduced performance) display
Operating Altitude:
<= 9842.52 ft (3000 m)
Line Rated Current:
5 A || 1 A
Ride-Through Time:
100 ms 120 V AC typical || 400 ms 230 V AC typical || 50 ms 125 V DC typical
Depth:
72 mm
Net Weight:
430 g
Maximum Power Consumption In Va:
11 VA 415 V
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Measurement Accuracy:
active energy +/- 0.5 % || reactive energy +/- 2 % || active power +/- 0.5 % || apparent power +/- 0.5 % || frequency +/- 0.05 % || power factor +/- 0.5 || current +/- 0.5 % || voltage +/- 0.5 % || apparent energy +/- 0.5 % || reactive power +/- 2 %
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Relative Humidity:
5-95 % 50-50°C non-condensing
Pollution Degree:
2
Device Short Name:
PM5340
Mounting Mode:
flush-mounted
Information Displayed:
tariff 4)
Product Name:
PowerLogic PM5000
Analogue Input Type:
voltage (impedance 10 MOhm) || current (impedance <= 0.3 mOhm)
Weight:
430 g
Ip Degree Of Protection:
IP51 display: conforming to IEC 60529 || IP30 rear: conforming to IEC 60529
Mounting Support:
framework
Data Recording:
data logs || alarm logs || time stamping || event logs || min/max of instantaneous values || maintenance logs
Display Type:
monochrome graphic LCD
Frequency Measurement Range:
45-65 Hz
China Rohs Regulation:
X
Range:
PowerLogic
Ambient Air Temperature For Storage:
-40-85°C
Memory Capacity:
256 kB
Accuracy Class:
class 0.5S active energy IEC 62053-22
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
90...450 V AC 45...65 Hz || 100...300 V DC
Display Resolution:
128 x 128 pixels
Connections - Terminals:
voltage circuit screw terminal block4 || control circuit screw terminal block2 || current transformer screw terminal block6 || input/output circuit screw terminal block6 || relay output screw terminal block4 || Ethernet network RJ45 connector
Measurement Current:
5-9000 mA
Communication Port Protocol:
Modbus TCP/IP 10/100 Mbit/s 2500 V || BACnet IP
Sustainable Offer Status:
Green Premium product
Electromagnetic Compatibility:
limits for harmonic current emissions class A conforming to IEC 61000-3-2 || electrostatic discharge level 4 conforming to IEC 61000-4-2 || conducted RF disturbances level 3 conforming to IEC 61000-4-6 || magnetic field at power frequency level 4 con
Product Certifications:
CE conforming to IEC 61010-1 || cULus conforming to UL 61010-1
Standards:
EN 50470-1 || IEC 62053-24 || IEC 60529 || UL 61010-1 || IEC 62053-22:2020 || EN 50470-3 || IEC 61557-12:2015 || IEC 62053-23:2020 || IEC 62052-11:2020 || IEC 62052-31:2015
Device Application:
multi-tariff || power monitoring
$2,341.71

Description

This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 31st Harmonic. Include 256 kiloBytes of memory for two fixed parameters, active and reactive energy. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 415 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 35 to 690 VAC at 47 to 63 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 47 to 63 Hz. Communication protocol are Modbus TCP/IP and BACnet/IP based on 10/100 Mbit/s, Ethernet with RJ45 port support. The meter also has two digital inputs or digital outputs, configurable, and dual relay outputs. There are 35 configurable alarms and it supports four tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.83 inches (72 millimetres), height 3.78 inches (96 millimetres) and product weight 15.2 onces (430 g).
View AllClose