Schneider Electric METSEPM8144 Power quality meter, PowerLogic PM8000, Essential, transducer and remote display, 64MB, 128s/c
SKU:
METSEPM8144
UPC:
MPN:
METSEPM8144
Condition:
New
Weight:
528 g
Ambient Air Temperature For Operation:
-25-70°C
China Rohs Regulation:
X
Depth:
90.8 mm
Cybersecurity:
password protection || Syslog protocol support || port hardening || robust security logs || enable/disable communication ports
Ip Degree Of Protection:
IP30 conforming to IEC 60529
Net Weight:
528 g
Electromagnetic Compatibility:
electrostatic discharge conforming to IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test conforming to IEC 61000-4-4 || surge immunity test confor
Product Certifications:
CE || cULus || N998
Device Application:
WAGES metering || power monitoring
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
90...415 V AC 45...65 Hz +/- 10 % || 110...415 V DC +/- 10 %
III400-690 V conforming to IEC 61010-1:ed. 3 || III400-690 V conforming to EN 61010-1:ed. 3 || III347-600 V conforming to UL 61010-1:ed. 3 || III347-600 V conforming to CSA C22.2 No 61010-1:ed. 3
Communication Service:
SMTP e-mail notification || RSTP support || NTP time synchronization || DHCP || PTP time synchronization
Variant:
essential
Range:
PowerLogic
Product Name:
PowerLogic PM8000
Mounting Mode:
flush-mounted || clip-on
Data Recording:
sequence of event recording || event logs || min/max of instantaneous values || harmonics logs || alarm logs || GPS synchronisation || waveform logs || data logs || time stamping || trending/forecasting || sag and swell logs || 10 data recorders
Line Rated Current:
10 A || 5 A || 1 A
Device Short Name:
PM8144
Installation Category:
III
Rohs Exemption Information:
Yes
Type Of Measurement:
current || voltage per phase, rms || frequency total || active and reactive power total || apparent power total || power factor total || active and reactive power per phase, rms || apparent power per phase, rms || power factor per phase, rms
Information Displayed:
voltage || current || frequency || power || energy consumption || harmonic distortion
Height:
90.5 mm
Display Type:
remote LCD display
Ambient Air Temperature For Storage:
-40-85°C
Eu Rohs Directive:
Compliant with Exemptions
Display Resolution:
320 x 240 pixels QVGA
Accuracy Class:
class 0.2S active energy IEC 62053-22 || class 0.2 active energy ANSI C12.20 || class 0.2 active power IEC 61557-12 || class 0.5S reactive energy IEC 62053-24 || class 0.5 power factor IEC 61557-12 || class 0.2 voltage IEC 61557-12 || class 0.2 curre
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Measurement Current:
50-10000 mA
Analogue Input Type:
voltage (impedance 5 MOhm) || current (impedance 0.3 mOhm)
Network Frequency:
50 Hz || 60 Hz
Measurement Accuracy:
current +/- 0.1 % || voltage +/- 0.1 % || active energy +/- 0.2 %
Communication Port Support:
ETHERNET || screw terminal block RS485
Power Quality Analysis:
EN 50160 2010 compliance report || IEEE 519 2014 compliance report || up to the 63rd harmonic || harmonic distortion || waveform capture || voltage sag and swell detection || programmablity (logic and math functions) || IEC 62586 power quality m
