Schneider Electric

Schneider Electric METSEPM8213 Power quality meter, PowerLogic PM8000, Standard, transducer, 512 MB, 256 s/c

(No reviews yet) Write a Review
SKU:
METSEPM8213
MPN:
METSEPM8213
Condition:
New
Product Certifications:
CE || cULus || N998
Relative Humidity:
5-95 %
Memory Capacity:
512 MB
Sampling Rate:
256 samples/cycle
Measurement Current:
50-10000 mA
Frequency Measurement Range:
42-69 Hz
Weight:
528 g
Power Quality Analysis:
EN 50160 2010 compliance report || IEEE 519 2014 compliance report || IEC 61000-4-30 class S power quality measurement || up to the 63rd harmonic || harmonic distortion || waveform capture || voltage sag and swell detection || programmablity (lo
Ambient Air Temperature For Storage:
-40-85°C
Analogue Input Type:
voltage (impedance 5 MOhm) || current (impedance 0.3 mOhm)
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Communication Port Protocol:
Modbus RTU 115 kbauds - 2-wire || ION 115 kbauds - 2-wire || DNP3 || IEC 61850 || Modbus TCP/IP || Ethernet Modbus TCP/IP daisy chain 10/100 Mbit/s || RSTP 801.1d 2004
Power Consumption In W:
18 W
Sustainable Offer Status:
Green Premium product
Variant:
standard
Device Short Name:
PM8213
Operating Altitude:
9842.52 ft (3000 m)
Standards:
IEC 62053-24 || IEC 62052-11 || IEC 61557-12 || IEC 62053-22 || IEEE 1588 || IEC 62586-2 || IEC 61326-1
Data Recording:
event logs || min/max of instantaneous values || time stamping || GPS synchronisation || alarm logs || data logs || trending/forecasting || sag and swell logs || waveform logs || sequence of event recording || harmonics logs || 50 data recorders
Type Of Measurement:
current || voltage || frequency || active and reactive power total || apparent power total || power factor total || active and reactive power per phase, rms || apparent power per phase, rms || power factor per phase, rms
Electromagnetic Compatibility:
electrostatic discharge conforming to IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test conforming to IEC 61000-4-4 || surge immunity test confor
Line Rated Current:
1 A || 10 A || 5 A
China Rohs Regulation:
X
Communication Service:
DHCP || SNMP || SMTP e-mail notification || RSTP support || NTP time synchronization || PTP time synchronization
[Us] Rated Supply Voltage:
20...60 V DC +/- 10 %
Number Of Outputs:
1 pulse
Network Frequency:
60 Hz || 50 Hz
Environmental Disclosure:
ENVPEP1406022EN
Accuracy Class:
class 0.2S active energy IEC 62053-22 || class 0.2 active energy ANSI C12.20 || class 0.2 active power IEC 61557-12 || class 0.5S reactive energy IEC 62053-24 || class 0.5 power factor IEC 61557-12 || class 0.2 voltage IEC 61557-12 || class 0.2 curre
Installation Category:
III
Display Type:
Without Display
Mounting Mode:
clip-on
Country of Origin:
United States
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Device Application:
WAGES metering || power monitoring
Mounting Support:
DIN rail
Ambient Air Temperature For Operation:
-25-70°C
Communication Port Support:
ETHERNET || screw terminal block RS485
Isolation Voltage:
III400-690 V conforming to IEC 61010-1:ed. 3 || III400-690 V conforming to EN 61010-1:ed. 3 || III347-600 V conforming to UL 61010-1:ed. 3 || III347-600 V conforming to CSA C22.2 No 61010-1:ed. 3
Depth:
90.8 mm
Information Displayed:
voltage || current || frequency || power || energy consumption || harmonic distortion
Poles Description:
3P || 1P + N || 3P + N
Range:
PowerLogic
Cybersecurity:
robust security logs || Syslog protocol support || password protection || port hardening || enable/disable communication ports
Measurement Accuracy:
current +/- 0.1 % || voltage +/- 0.1 % || active energy +/- 0.2 %
$8,909.63

Description

The PowerLogic PM8000 series meters are compact, cost-effective multifunction power meters that will help you ensure reliability and efficiency of your power-critical facility. They reveal and provide understanding of complex power quality conditions enabling action to be taken to mitigate any issue. The PowerLogic PM8000 series meters have the versatility to perform nearly any job you need a meter to do, wherever you need it! The modular, flexible ION technology architecture enables a simple, building block approach for customizing each meter to any application. With patented Disturbance Direction Detection, revenue grade accuracy, multiple communication ports, onboard power quality analysis, web interface and a color graphical display. Certified by third party labs for energy accuracy (IEC 62052-11, IEC 62052-22, IEC 62052-24) and power quality (IEC 62586-2, IEC 61000-4-30 Class S). The PowerLogic PM8000 series provides data quality confidence you can count on. Cybersecurity features include secure protocols (HTTPS, SFTP), security event logging, Syslog protocol. Ability to enable/disable communication ports, and 50 user configurable accounts. With 512 MB of memory to support 50 data logs, 50+ user-definable alarms, waveform captures, 1/2 cycle RMS logging, custom web pages, min/max logs, energy trends, and Time of Use. The ability to timestamp events to +/-1 ms utilizing time synchronization method that include PTP (IEEE1588), NTP, IRIG-B, GPS ASCII (RS485) and network time set function. 3 digital inputs and one digital output, plus the ability to add up to 4 option modules. I/O option modules include 2 relays and 6 digital inputs or 2 analog outputs and 4 analog inputs. Low voltage control power range of 24-60 VDC. Operating environment of -25 to +70C; Humidity rating of 5% to 95%; Altitude up to 3000 m. DIN rail mounting transducer meter (no display).
View AllClose

Related Products

Related Products