Schneider Electric

Schneider Electric METSEPM8244 Power quality meter, PowerLogic PM8000, Standard, transducer and remote display, 512 MB, 256 s/c

(No reviews yet) Write a Review
SKU:
METSEPM8244
MPN:
METSEPM8244
Condition:
New
Number Of Outputs:
1 pulse
Mounting Mode:
flush-mounted || clip-on
Frequency Measurement Range:
42-69 Hz
Product Name:
PowerLogic PM8000
Communication Network Type:
IPv6 (internet protocol)
Network Frequency:
50 Hz || 60 Hz
Accuracy Class:
class 0.2S active energy IEC 62053-22 || class 0.2 active energy ANSI C12.20 || class 0.2 active power IEC 61557-12 || class 0.5S reactive energy IEC 62053-24 || class 0.5 power factor IEC 61557-12 || class 0.2 voltage IEC 61557-12 || class 0.2 curre
Variant:
standard
Memory Capacity:
512 MB
Isolation Voltage:
III400-690 V conforming to IEC 61010-1:ed. 3 || III400-690 V conforming to EN 61010-1:ed. 3 || III347-600 V conforming to UL 61010-1:ed. 3 || III347-600 V conforming to CSA C22.2 No 61010-1:ed. 3
Device Application:
WAGES metering || power monitoring
Net Weight:
528 g
Width:
90.5 mm
Standards:
IEC 62053-22 || IEC 62053-24 || IEC 62052-11 || IEC 61557-12 || IEEE 1588 || IEC 62586-2 || IEC 61326-1
Line Rated Current:
10 A || 5 A || 1 A
Communication Port Protocol:
Modbus RTU 115 kbauds - 2-wire || ION 115 kbauds - 2-wire || DNP3 || IEC 61850 || Modbus TCP/IP || Ethernet Modbus TCP/IP daisy chain 10/100 Mbit/s || RSTP 801.1d 2004
Provided Equipment:
remote display
Operating Altitude:
9842.52 ft (3000 m)
Rohs Exemption Information:
Yes
Measurement Current:
50-10000 mA
Product Certifications:
CE || cULus || N998
Number Of Inputs:
3 digital 30 V AC || 3 digital 60 V DC
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Data Recording:
sequence of event recording || event logs || min/max of instantaneous values || harmonics logs || alarm logs || GPS synchronisation || waveform logs || data logs || time stamping || trending/forecasting || sag and swell logs || 50 data recorders
Web Services:
customizable home page || file upload/download via FTP || file upload/download via SFTP || web server || alarm notification by e-mail || viewing of captured waveform (FTP) || viewing of captured waveform (web) || HTTPS server
Country of Origin:
Canada
China Rohs Regulation:
X
Power Consumption In Va:
16 VA 230 V AC
Information Displayed:
voltage || current || frequency || power || energy consumption || harmonic distortion
[Us] Rated Supply Voltage:
90...415 V AC 45...65 Hz +/- 10 % || 110...415 V DC +/- 10 %
Sustainable Offer Status:
Green Premium product
Circularity Profile:
ENVEOLI1406022EN
Installation Category:
III
Measurement Voltage:
57-400 V AC 42...69 Hz between phase and neutral || 100-690 V AC 42...69 Hz between phases
Cybersecurity:
password protection || Syslog protocol support || port hardening || robust security logs || enable/disable communication ports
Weight:
528 g
Communication Service:
SMTP e-mail notification || RSTP support || NTP time synchronization || DHCP || PTP time synchronization
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Compliant with Exemptions
Sampling Rate:
256 samples/cycle
Display Resolution:
320 x 240 pixels QVGA
Power Quality Analysis:
EN 50160 2010 compliance report || IEEE 519 2014 compliance report || IEC 61000-4-30 class S power quality measurement || up to the 63rd harmonic || harmonic distortion || waveform capture || voltage sag and swell detection || programmablity (lo
Range:
PowerLogic
Mounting Support:
DIN rail meter device || framework remote display
Relative Humidity:
5-95 %
Type Of Measurement:
current || voltage || frequency || active and reactive power total || apparent power total || power factor total || active and reactive power per phase, rms || apparent power per phase, rms || power factor per phase, rms
Depth:
90.8 mm
Device Short Name:
PM8244
$9,737.57

Description

The PowerLogic PM8000 series meters are compact, cost-effective multifunction power meters that will help you ensure reliability and efficiency of your power-critical facility. They reveal and provide understanding of complex power quality conditions enabling action to be taken to mitigate any issue. The PowerLogic PM8000 series meters have the versatility to perform nearly any job you need a meter to do, wherever you need it! The modular, flexible ION technology architecture enables a simple, building block approach for customizing each meter to any application. With patented Disturbance Direction Detection, revenue grade accuracy, multiple communication ports, onboard power quality analysis, web interface and a color graphical display. Certified by third party labs for energy accuracy (IEC 62052-11, IEC 62052-22, IEC 62052-24) and power quality (IEC 62586-2, IEC 61000-4-30 Class S). The PowerLogic PM8000 series provides data quality confidence you can count on. Cybersecurity features include secure protocols (HTTPS, SFTP), security event logging, Syslog protocol. Ability to enable/disable communication ports, and 50 user configurable accounts. With 512 MB of memory to support 50 data logs, 50+ user-definable alarms, waveform captures, 1/2 cycle RMS logging, custom web pages, min/max logs, energy trends, and Time of Use. The ability to timestamp events to +/-1 ms utilizing time synchronization method that include PTP (IEEE1588), NTP, IRIG-B, GPS ASCII (RS485) and network time set function. 3 digital inputs and one digital output, plus the ability to add up to 4 option modules. I/O option modules include 2 relays and 6 digital inputs or 2 analog outputs and 4 analog inputs. Wide control power range of 90-415 VAC / 110-415 VDC. Operating environment of -25 to +70C; Humidity rating of 5% to 95%; Altitude up to 3000 m. DIN rail mounting with remote display.
View AllClose