Schneider Electric METSEPM8344 Power quality meter, PowerLogic PM8000, Advanced, transducer and remote display, 512MB, 512s/c
SKU:
METSEPM8344
UPC:
MPN:
METSEPM8344
Condition:
New
Measurement Voltage:
57-400 V AC 42...69 Hz between phase and neutral || 100-690 V AC 42...69 Hz between phases
Ambient Air Temperature For Operation:
-25-70°C
Circularity Profile:
ENVEOLI1406022EN
Mounting Support:
DIN rail meter device || framework remote display
Analogue Input Type:
voltage (impedance 5 MOhm) || current (impedance 0.3 mOhm)
Communication Port Support:
ETHERNET || screw terminal block RS485
Frequency Measurement Range:
42-69 Hz
Measurement Current:
50-10000 mA
Eu Rohs Directive:
Compliant with Exemptions
Number Of Outputs:
1 pulse
Memory Capacity:
512 MB
Relative Humidity:
5-95 %
Display Resolution:
320 x 240 pixels QVGA
Number Of Inputs:
3 digital 30 V AC || 3 digital 60 V DC
Environmental Disclosure:
ENVPEP1406022EN
Range:
PowerLogic
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Mode:
flush-mounted || clip-on
China Rohs Regulation:
X
Product Name:
PowerLogic PM8000
Device Short Name:
PM8344
Type Of Measurement:
current per phase, rms || voltage per phase, rms || frequency per phase, rms || active and reactive power total || apparent power total || power factor total || active and reactive power per phase, rms || apparent power per phase, rms || power factor
Ambient Air Temperature For Storage:
-40-85°C
Product Or Component Type:
power meter
Weight:
528 g
Communication Network Type:
IPv6 (internet protocol)
Net Weight:
528 g
Operating Altitude:
9842.52 ft (3000 m)
Installation Category:
III
Display Type:
remote LCD display
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sampling Rate:
512 samples/cycle
Information Displayed:
voltage || current || frequency || power || energy consumption || harmonic distortion
Communication Service:
SMTP e-mail notification || RSTP support || NTP time synchronization || DHCP || PTP time synchronization
Rohs Exemption Information:
Yes
Provided Equipment:
remote display
Power Consumption In Va:
16 VA 230 V AC
Ip Degree Of Protection:
IP30 conforming to IEC 60529
Height:
90.5 mm
Depth:
90.8 mm
Power Quality Analysis:
EN 50160 2010 compliance report || IEEE 519 2014 compliance report || IEC 61000-4-30 class A power quality measurement || up to the 63rd harmonic || harmonic distortion || waveform capture || IEC 62586 voltage sag and swell detection || IEC 61000-
Measurement Accuracy:
current +/- 0.1 % || voltage +/- 0.1 % || active energy +/- 0.2 %
Product Certifications:
CE || cULus || N998
Accuracy Class:
class 0.2S active energy IEC 62053-22 || class 0.2 active energy ANSI C12.20 || class 0.2 active power IEC 61557-12 || class 0.5S reactive energy IEC 62053-24 || class 0.5 power factor IEC 61557-12 || class 0.2 voltage IEC 61557-12 || class 0.2 curre
