Name: Schneider Electric PCSN030Y4N1 PCSN active harmonic filter 30 amp 208-415 VAC - wall-mounted, UL Type 1
Brand: Schneider Electric
SKU: PCSN030Y4N1
Price: 42989.7 USD
Availability: InStock

Schneider Electric PCSN030Y4N1 PCSN active harmonic filter 30 amp 208-415 VAC - wall-mounted, UL Type 1

(No reviews yet) Write a Review

SKU:

PCSN030Y4N1

MPN:

PCSN030Y4N1

Condition:

New

Product Or Component Type:

active harmonic filter

Mounting Location:

indoor

Reactive Power Rating:

10.8 kvar 208 V AC 50/60 Hz

Ambient Air Temperature For Operation:

0-40°C || 0-50°C maximum with current derating of 2 % per°C above 40°C

Range Of Product:

AccuSine

Accessibility For Operation:

front

Nominal Output Current:

30 A

Electromagnetic Compatibility:

electromagnetic emission, class A EN 61000-6-4 || electromagnetic immunity EN 61000-6-2

Location Of Connection:

bottom

Product Certifications:

cULus

Standards:

IEC 62477-1 || IEC 61439-1 || EN 61000-6-2 || EN 61000-6-4 || ISO 9001 || IEEE 519-2014 || UL 508

Mercury Free:

Yes

Input Frequency:

50/60 Hz

Operating Mode:

phase harmonic correction || neutral harmonic correction || mains current balancing || power factor correction

Mounting Mode:

wall-mounted

Circularity Profile:

ENVEOLI1811005EN

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Impregnation Material:

conformal coated

Maximum Permissible Voltage:

1.1 x Un

Function Available:

rear plenum with forced ventilation for high heat flow

Rohs Exemption Information:

Yes

Network Rated Voltage:

208-415 V AC

Relative Humidity:

0-95 % non-condensing

Product Name:

AccuSine PCSn

Color:

Light gray RAL 7035)

Protection Type:

without protection

Environmental Characteristic:

operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Net Weight:

163 lb(US)

Sustainable Offer Status:

Green Premium product

Environmental Disclosure:

ENVPEP1811005EN

Poles Description:

3P + N || 3P

Ambient Air Temperature For Storage:

-20-60°C

Operating Altitude:

<= 3280.84 ft (1000 m) 1 % per 100 m || 0...4800 m

China Rohs Regulation:

Product out of China RoHS scope. Substance declaration for your information.

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Depth:

10.4 in

Degree Of Protection:

UL type 1

Eu Rohs Directive:

Compliant with Exemptions

Weight:

163 lb(US)

Wiring Mode:

3 or 4 wires

Description

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. In addition to 3-phase mitigation, it has the ability to compensate for neutral harmonic currents. This version is UL Type 1, and can be connected on Low Voltage networks rated 208 Volt to 415 Volt. It is specified for a standard Root Mean Square output current rating of 30 Amps, 90 Amps neutral. The enclosure is wall mounted, allow cable entry from bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, IBC 2015, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4 Class A, IEC 61439-1 and IEEE 519-2014. Up to 12 units in parallel per set of CT; any size unit combination possible (subject to network characteristics). Master capable. Frame exterior dimensions are 440 millimetres in width, 265 millimetres in depth, 960 millimetres in height and product weight 61 kg.

View AllClose