Schneider Electric

Schneider Electric PCSN060Y4N1 PCSN active harmonic filter 60 amp 208-415 VAC - wall-mounted, UL Type 1

(No reviews yet) Write a Review
SKU:
PCSN060Y4N1
MPN:
PCSN060Y4N1
Condition:
New
Mounting Mode:
wall-mounted
Electromagnetic Compatibility:
electromagnetic emission, class A EN 61000-6-4 || electromagnetic immunity EN 61000-6-2
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C above 40°C
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Range Of Product:
AccuSine
Depth:
10.4 in
Accessibility For Operation:
front
Poles Description:
3P + N || 3P
Product Certifications:
cULus
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Permissible Voltage:
1.1 x Un
Degree Of Protection:
UL type 1
Impregnation Material:
conformal coated
Operating Mode:
phase harmonic correction || neutral harmonic correction || mains current balancing || power factor correction
Function Available:
rear plenum with forced ventilation for high heat flow
Wiring Mode:
3 or 4 wires
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reactive Power Rating:
21.6 kvar 208 V AC 50/60 Hz
Nominal Output Current:
60 A
Input Frequency:
50/60 Hz
Environmental Disclosure:
ENVPEP1811005EN
Weight:
196 lb(US)
Mounting Location:
indoor
Eu Rohs Directive:
Compliant with Exemptions
Standards:
IEC 62477-1 || IEC 61439-1 || EN 61000-6-2 || EN 61000-6-4 || ISO 9001 || IEEE 519-2014 || UL 508
Product Or Component Type:
active harmonic filter
Mercury Free:
Yes
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Ambient Air Temperature For Storage:
-20-60°C
Relative Humidity:
0-95 % non-condensing
Location Of Connection:
bottom
Circularity Profile:
ENVEOLI1811005EN
Network Rated Voltage:
208-415 V AC
Protection Type:
without protection
Net Weight:
196 lb(US)
Product Name:
AccuSine PCSn
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Color:
Light gray RAL 7035)
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m || 0...4800 m
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
$59,102.50

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. In addition to 3-phase mitigation, it has the ability to compensate for neutral harmonic currents. This version is UL Type 1, and can be connected on Low Voltage networks rated 208 Volt to 415 Volt. It is specified for a standard Root Mean Square output current rating of 60 Amps, 180 Amps neutral. The enclosure is wall mounted, allow cable entry from bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, IBC 2015, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4 Class A, IEC 61439-1 and IEEE 519-2014. Up to 12 units in parallel per set of CT; any size unit combination possible (subject to network characteristics). Master capable. Frame exterior dimensions are 440 millimetres in width, 265 millimetres in depth, 960 millimetres in height and product weight 75 kg.
View AllClose