Schneider Electric

Schneider Electric PCSP060D5N12 Active harmonic filter 60 amp 380-480 VAC N12 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP060D5N12
MPN:
PCSP060D5N12
Condition:
New
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Reactive Power Rating:
50 kvar 480 V AC 50/60 Hz
Mercury Free:
Yes
Product Certifications:
CE || RCM || ABS || cULus
Impregnation Material:
conformal coated
Net Weight:
240 kg
Enclosure Mounting:
floor-standing
Color:
Light gray RAL 7035)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Network Rated Voltage:
380-480 V AC
Weight:
240 kg
Degree Of Protection:
UL type 12
Operating Mode:
harmonic cancellation || power factor correction || mains current balancing
Mounting Location:
indoor
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Product Or Component Type:
active harmonic filter
Breaking Capacity:
200 kA
Nominal Output Current:
60 A
Accessibility For Operation:
front
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Wiring Mode:
3 or 4 wires
Ambient Air Temperature For Storage:
-20-60°C
Poles Description:
3P
Standards:
UL 60947-1 || EN 60439-1 || CSA C22.2 No 60947-1-07 || CSA C22.2 No 14 || EN 61000-6-4 || UL 508
Eu Rohs Directive:
Compliant
Location Of Connection:
top or bottom
Product Name:
AccuSine PCS+
Function Available:
rear plenum with forced ventilation for high heat flow
Rohs Exemption Information:
Yes
Toxic Heavy Metal Free:
Yes
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Relative Humidity:
0-95 %
Control Type:
door-interlocked with rotary handle
Protection Type:
circuit breaker protection
Maximum Permissible Voltage:
1.1 x Un
Depth:
500 mm
Neutral Protection Setting:
not provided
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Of Product:
AccuSine
Warranty:
18 months
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
$91,006.70

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 12, close to ingress protection IP54, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 60 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 800 millimetres in width, 500 millimetres in depth, 2100 millimetres in height and product weight 291 kg.
View AllClose