Schneider Electric

Schneider Electric PCSP120D5IP54 Active harmonic filter - 120 A 380..480 V AC - IP54 enclosure

(No reviews yet) Write a Review
SKU:
PCSP120D5IP54
MPN:
PCSP120D5IP54
Condition:
New
Function Available:
rear plenum with forced ventilation for high heat flow
Color:
Light gray RAL 7035)
Wiring Mode:
3 or 4 wires
Mercury Free:
Yes
Eu Rohs Directive:
Compliant
Reach Free Of Svhc:
Yes
Nominal Output Current:
120 A
Product Or Component Type:
active harmonic filter
Control Type:
door-interlocked with rotary handle
Location Of Connection:
top or bottom
Operating Mode:
power factor correction || mains current balancing || harmonic cancellation
Poles Description:
3P
Relative Humidity:
0-95 %
Breaking Capacity:
200 kA
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Reactive Power Rating:
100 kvar 480 V AC 50/60 Hz
Mounting Location:
indoor
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Protection Type:
circuit breaker protection
Ip Degree Of Protection:
IP54
Warranty:
18 months
Range Of Product:
AccuSine
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Product Certifications:
CE || RCM || cULus || ABS
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Network Rated Voltage:
380-480 V AC
Enclosure Mounting:
floor-standing
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Product Name:
AccuSine PCS+
Ambient Air Temperature For Storage:
-20-60°C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Standards:
EN 60439-1 || UL 508 || CSA C22.2 No 60947-1-07 || UL 60947-1 || EN 61000-6-4 || CSA C22.2 No 14
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
260 kg
Impregnation Material:
conformal coated
Depth:
500 mm
Maximum Permissible Voltage:
1.1 x Un
Neutral Protection Setting:
not provided
Accessibility For Operation:
front
Toxic Heavy Metal Free:
Yes
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Weight:
260 kg
$119,136.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is ingress protection IP54 and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 120 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 800 millimetres in width, 500 millimetres in depth, 2100 millimetres in height and product weight 293 kg.
View AllClose