Schneider Electric

Schneider Electric PCSP120D5N12 Active harmonic filter 120 amp 380-480 VAC N12 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP120D5N12
MPN:
PCSP120D5N12
Condition:
New
Standards:
EN 61000-6-4 || UL 60947-1 || UL 508 || CSA C22.2 No 60947-1-07 || EN 60439-1 || CSA C22.2 No 14
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Color:
Light gray RAL 7035)
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Impregnation Material:
conformal coated
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Operating Mode:
harmonic cancellation || mains current balancing || power factor correction
Relative Humidity:
0-95 %
Eu Rohs Directive:
Compliant
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Certifications:
RCM || ABS || cULus || CE
Network Rated Voltage:
380-480 V AC
Enclosure Mounting:
floor-standing
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Protection Type:
circuit breaker protection
Degree Of Protection:
UL type 12
Rohs Exemption Information:
Yes
Depth:
500 mm
Location Of Connection:
top or bottom
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Toxic Heavy Metal Free:
Yes
Product Name:
AccuSine PCS+
Nominal Output Current:
120 A
Poles Description:
3P
Mercury Free:
Yes
Maximum Permissible Voltage:
1.1 x Un
Warranty:
18 months
Weight:
260 kg
Range Of Product:
AccuSine
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Or Component Type:
active harmonic filter
Breaking Capacity:
200 kA
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Ambient Air Temperature For Storage:
-20-60°C
Control Type:
door-interlocked with rotary handle
Reactive Power Rating:
100 kvar 480 V AC 50/60 Hz
Accessibility For Operation:
front
Mounting Location:
indoor
Net Weight:
260 kg
Neutral Protection Setting:
not provided
Function Available:
rear plenum with forced ventilation for high heat flow
Wiring Mode:
3 or 4 wires
$119,136.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 12, close to ingress protection IP54, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 120 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 800 millimetres in width, 500 millimetres in depth, 2100 millimetres in height and product weight 293 kg.
View AllClose