Schneider Electric

Schneider Electric PCSP120D5N2 Active harmonic filter 120 amp 380-480 VAC N2 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP120D5N2
MPN:
PCSP120D5N2
Condition:
New
Neutral Protection Setting:
not provided
Nominal Output Current:
120 A
Operating Mode:
harmonic cancellation || power factor correction || mains current balancing
Wiring Mode:
3 or 4 wires
Reactive Power Rating:
100 kvar 480 V AC 50/60 Hz
Product Name:
AccuSine PCS+
Ambient Air Temperature For Storage:
-20-60°C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Net Weight:
254 kg
Color:
Light gray RAL 7035)
Range Of Product:
AccuSine
Location Of Connection:
top or bottom
Weight:
254 kg
Depth:
500 mm
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Enclosure Mounting:
floor-standing
Standards:
EN 60439-1 || CSA C22.2 No 60947-1-07 || CSA C22.2 No 14 || EN 61000-6-4 || UL 60947-1 || UL 508
Control Type:
door-interlocked with rotary handle
Mercury Free:
Yes
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Poles Description:
3P
Eu Rohs Directive:
Compliant
Accessibility For Operation:
front
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Impregnation Material:
conformal coated
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Breaking Capacity:
200 kA
Relative Humidity:
0-95 %
Toxic Heavy Metal Free:
Yes
Protection Type:
circuit breaker protection
Network Rated Voltage:
380-480 V AC
Product Certifications:
RCM || ABS || CE || cULus
Rohs Exemption Information:
Yes
Maximum Permissible Voltage:
1.1 x Un
Degree Of Protection:
UL type 2
Function Available:
rear plenum with forced ventilation for high heat flow
Product Or Component Type:
active harmonic filter
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Mounting Location:
indoor
$107,553.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 2, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 120 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 800 millimetres in width, 500 millimetres in depth, 2100 millimetres in height and product weight 279 kg.
View AllClose