Schneider Electric

Schneider Electric PCSP157D6N12 Active harmonic filter 157 amp 500-600 VAC N12 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP157D6N12
MPN:
PCSP157D6N12
Condition:
New
Neutral Protection Setting:
not provided
Depth:
600 mm
Operating Mode:
power factor correction || harmonic cancellation || mains current balancing
Rohs Exemption Information:
Yes
Network Rated Voltage:
500-600 V AC
Reactive Power Rating:
163 kvar 600 V AC 50/60 Hz
Function Available:
rear plenum with forced ventilation for high heat flow
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Ambient Air Temperature For Storage:
-20-60°C
Mounting Location:
indoor
Relative Humidity:
0-95 %
Enclosure Mounting:
floor-standing
Mercury Free:
Yes
Eu Rohs Directive:
Compliant
Control Type:
door-interlocked with rotary handle
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Net Weight:
556 kg
Wiring Mode:
3 or 4 wires
Poles Description:
3P
Weight:
556 kg
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Standards:
UL 60947-1 || EN 60439-1 || UL 508 || EN 61000-6-4 || CSA C22.2 No 60947-1-07 || CSA C22.2 No 14
Impregnation Material:
conformal coated
Degree Of Protection:
UL type 12
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Or Component Type:
active harmonic filter
Protection Type:
circuit breaker protection
Location Of Connection:
top or bottom
Nominal Output Current:
157 A
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Breaking Capacity:
100 kA
Maximum Permissible Voltage:
1.1 x Un
Toxic Heavy Metal Free:
Yes
Color:
Light gray RAL 7035)
Warranty:
18 months
Range Of Product:
AccuSine
Product Certifications:
RCM || ABS || cULus || CE
Accessibility For Operation:
front
Product Name:
AccuSine PCS+
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
$270,290.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 12, close to ingress protection IP54, and can be connected on Low Voltage networks rated 480 Volt to 600 Volt. It is specified for a standard Root Mean Square output current rating of 157 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 1400 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 653 kg.
View AllClose