Schneider Electric

Schneider Electric PCSP200D5IP54 Active harmonic filter - 200 A 380..480 V AC - IP54 enclosure

(No reviews yet) Write a Review
SKU:
PCSP200D5IP54
MPN:
PCSP200D5IP54
Condition:
New
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Accessibility For Operation:
front
Depth:
600 mm
Reach Free Of Svhc:
Yes
Function Available:
rear plenum with forced ventilation for high heat flow
Protection Type:
circuit breaker protection
Impregnation Material:
conformal coated
Poles Description:
3P
Maximum Permissible Voltage:
1.1 x Un
Breaking Capacity:
200 kA
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Net Weight:
362 kg
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Enclosure Mounting:
floor-standing
Nominal Output Current:
200 A
Reactive Power Rating:
166 kvar 480 V AC 50/60 Hz
Product Certifications:
RCM || cULus || CE || ABS
Eu Rohs Directive:
Compliant
Standards:
EN 61000-6-4 || CSA C22.2 No 60947-1-07 || CSA C22.2 No 14 || UL 508 || EN 60439-1 || UL 60947-1
Network Rated Voltage:
380-480 V AC
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Or Component Type:
active harmonic filter
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Range Of Product:
AccuSine
Rohs Exemption Information:
Yes
Location Of Connection:
top or bottom
Control Type:
door-interlocked with rotary handle
Color:
Light gray RAL 7035)
Relative Humidity:
0-95 %
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Name:
AccuSine PCS+
Wiring Mode:
3 or 4 wires
Neutral Protection Setting:
not provided
Mounting Location:
indoor
Ip Degree Of Protection:
IP54
Toxic Heavy Metal Free:
Yes
Operating Mode:
mains current balancing || harmonic cancellation || power factor correction
Warranty:
18 months
Ambient Air Temperature For Storage:
-20-60°C
Weight:
362 kg
$163,812.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is ingress protection IP54 and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 200 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 900 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 402 kg.
View AllClose