Schneider Electric

Schneider Electric PCSP200D5N12 Active harmonic filter 200 amp 380-480 VAC N12 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP200D5N12
MPN:
PCSP200D5N12
Condition:
New
Ambient Air Temperature For Storage:
-20-60°C
Reactive Power Rating:
166 kvar 480 V AC 50/60 Hz
Toxic Heavy Metal Free:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Relative Humidity:
0-95 %
Impregnation Material:
conformal coated
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Mounting Location:
indoor
Product Name:
AccuSine PCS+
Control Type:
door-interlocked with rotary handle
Rohs Exemption Information:
Yes
Net Weight:
362 kg
Product Certifications:
CE || RCM || ABS || cULus
Weight:
362 kg
Neutral Protection Setting:
not provided
Product Or Component Type:
active harmonic filter
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Accessibility For Operation:
front
Enclosure Mounting:
floor-standing
Maximum Permissible Voltage:
1.1 x Un
Degree Of Protection:
UL type 12
Nominal Output Current:
200 A
Warranty:
18 months
Location Of Connection:
top or bottom
Network Rated Voltage:
380-480 V AC
Protection Type:
circuit breaker protection
Range Of Product:
AccuSine
Breaking Capacity:
200 kA
Depth:
600 mm
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Function Available:
rear plenum with forced ventilation for high heat flow
Mercury Free:
Yes
Wiring Mode:
3 or 4 wires
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Compliant
Operating Mode:
power factor correction || mains current balancing || harmonic cancellation
Standards:
CSA C22.2 No 60947-1-07 || EN 61000-6-4 || UL 60947-1 || EN 60439-1 || UL 508 || CSA C22.2 No 14
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Color:
Light gray RAL 7035)
Poles Description:
3P
$163,812.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 12, close to ingress protection IP54, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 200 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 900 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 402 kg.
View AllClose