Schneider Electric

Schneider Electric PCSP200D7N2 Active harmonic filter 200 amp 600-690 VAC N2 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP200D7N2
MPN:
PCSP200D7N2
Condition:
New
Wiring Mode:
3 or 4 wires
Warranty:
18 months
Mounting Location:
indoor
Maximum Permissible Voltage:
1.1 x Un
Product Or Component Type:
active harmonic filter
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Certifications:
CE || ABS || RCM || cULus
Relative Humidity:
0-95 %
Toxic Heavy Metal Free:
Yes
Breaking Capacity:
80 kA
Degree Of Protection:
UL type 2
Poles Description:
3P
Mercury Free:
Yes
Location Of Connection:
top or bottom
Protection Type:
switch-disconnector fuse
Enclosure Mounting:
floor-standing
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Ambient Air Temperature For Storage:
-20-60°C
Function Available:
rear plenum with forced ventilation for high heat flow
Control Type:
door-interlocked with rotary handle
Standards:
UL 508 || EN 61000-6-4 || CSA C22.2 No 14 || UL 60947-1 || CSA C22.2 No 60947-1-07 || EN 60439-1
Neutral Protection Setting:
not provided
Eu Rohs Directive:
Compliant
Depth:
600 mm
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Color:
Light gray RAL 7035)
Impregnation Material:
conformal coated
Accessibility For Operation:
front
Reactive Power Rating:
239 kvar 690 V AC 50/60 Hz
Net Weight:
684 kg
Network Rated Voltage:
600-690 V AC
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Nominal Output Current:
200 A
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Name:
AccuSine PCS+
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Weight:
684 kg
Operating Mode:
harmonic cancellation || mains current balancing || power factor correction
Range Of Product:
AccuSine
$314,308.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 2, and can be connected on Low Voltage networks rated 600 Volt to 690 Volt. It is specified for a standard Root Mean Square output current rating of 200 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 1400 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 827 kg.
View AllClose