Schneider Electric

Schneider Electric PCSP235D6N12 Active harmonic filter 235 amp 500-600 VAC N12 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP235D6N12
MPN:
PCSP235D6N12
Condition:
New
Net Weight:
990 kg
Weight:
990 kg
Product Or Component Type:
active harmonic filter
Impregnation Material:
conformal coated
Reactive Power Rating:
244 kvar 600 V AC 50/60 Hz
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Function Available:
rear plenum with forced ventilation for high heat flow
Depth:
600 mm
Range Of Product:
AccuSine
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Toxic Heavy Metal Free:
Yes
Rohs Exemption Information:
Yes
Protection Type:
circuit breaker protection
Maximum Permissible Voltage:
1.1 x Un
Breaking Capacity:
100 kA
Enclosure Mounting:
floor-standing
Eu Rohs Directive:
Compliant
Warranty:
18 months
Location Of Connection:
top or bottom
Degree Of Protection:
UL type 12
Mercury Free:
Yes
Neutral Protection Setting:
not provided
Product Certifications:
CE || RCM || ABS || cULus
Color:
Light gray RAL 7035)
Product Name:
AccuSine PCS+
Control Type:
door-interlocked with rotary handle
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Nominal Output Current:
235 A
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Wiring Mode:
3 or 4 wires
Network Rated Voltage:
500-600 V AC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Location:
indoor
Ambient Air Temperature For Storage:
-20-60°C
Relative Humidity:
0-95 %
Poles Description:
3P
Operating Mode:
power factor correction || harmonic cancellation || mains current balancing
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Accessibility For Operation:
front
Standards:
CSA C22.2 No 60947-1-07 || EN 61000-6-4 || EN 60439-1 || UL 508 || CSA C22.2 No 14 || UL 60947-1
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
$346,819.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type 12, close to ingress protection IP54, and can be connected on Low Voltage networks rated 480 Volt to 600 Volt. It is specified for a standard Root Mean Square output current rating of 235 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 1400 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 770 kg.
View AllClose