Schneider Electric

Schneider Electric PCSP300D2IP54 Active harmonic filter 300 amp 208-240 VAC IP54 Enclosure

(No reviews yet) Write a Review
SKU:
PCSP300D2IP54
MPN:
PCSP300D2IP54
Condition:
New
Network Rated Voltage:
208-240 V AC
Breaking Capacity:
200 kA
Relative Humidity:
0-95 %
Toxic Heavy Metal Free:
Yes
Product Certifications:
RCM || ABS || cULus || CE
Nominal Output Current:
300 A
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Accessibility For Operation:
front
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Net Weight:
405 kg
Depth:
600 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Operating Mode:
harmonic cancellation || power factor correction || mains current balancing
Function Available:
rear plenum with forced ventilation for high heat flow
Weight:
405 kg
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Location Of Connection:
top or bottom
Protection Type:
circuit breaker protection
Product Or Component Type:
active harmonic filter
Product Name:
AccuSine PCS+
Neutral Protection Setting:
not provided
Ip Degree Of Protection:
IP54
Mounting Location:
indoor
Rohs Exemption Information:
Yes
Enclosure Mounting:
floor-standing
Control Type:
door-interlocked with rotary handle
Color:
Light gray RAL 7035)
Ambient Air Temperature For Storage:
-20-60°C
Input Frequency:
50/60 Hz +/- 3 Hz auto sensing
Maximum Permissible Voltage:
1.1 x Un
Poles Description:
3P
Standards:
CSA C22.2 No 14 || CSA C22.2 No 60947-1-07 || UL 508 || EN 61000-6-4 || UL 60947-1 || EN 60439-1
Eu Rohs Directive:
Compliant
Mercury Free:
Yes
Wiring Mode:
3 or 4 wires
Reactive Power Rating:
124.7 kvar 240 V AC 50/60 Hz
Range Of Product:
AccuSine
Impregnation Material:
conformal coated
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$216,761.00

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is ingress protection IP54 and can be connected on Low Voltage networks rated 208 Volt to 240 Volt. It is specified for a standard Root Mean Square output current rating of 300 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 900 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 436 kg.
View AllClose