Schneider Electric

Schneider Electric QMB2IMA24 Surge protection device, Surgelogic, QMB, 240kA, 208Y/120 VAC, 3 phase, 4 wire, SPD type 2

(No reviews yet) Write a Review
SKU:
QMB2IMA24
MPN:
QMB2IMA24
Condition:
New
Local Signaling:
alarm fault || status LED
Depth:
165 mm
Connections - Terminals:
plug in
[Uc] Maximum Continuous Operating Voltage:
150 V
Enclosure Material:
painted sheet steel
Warranty:
18 months
Nominal Discharge Current:
20 kA
Device Short Name:
IMA
Eu Rohs Directive:
Under investigation
Country of Origin:
United States
Provided Equipment:
alarm enable/disable switch || surge counter || dry contacts
[Ue] Rated Operational Voltage:
208Y/120 V AC
Surge Current:
240 kA
Phase:
3 phase
Short-Circuit Protection:
200 kA
Standards:
UL 1449:ed. 3 || CSA C22.2 No 8:1986 || UL 1283 || UL 67 || CSA C22.2 No 29
Wiring Configuration:
4-wire
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Range Of Product:
Surgelogic
Product Or Component Type:
surge protection device
$15,690.00

Description

Surgelogic™ Type IMA systems are internal surgical protection devices with a focus on service entrance and critical branch panel surge suppresion. With a surge current rating of 240,000 Amps and enhanced EMI/RFI filtering, this unit is retrofitted to be installed in a wide variety QMB Branch units. Being modular in design, this unit is able to achieve superior surge suppression on the load side including at the branch panel. This unit uses the WYE system to allow two different voltages using three phase. This product is UL and CSA certified.
View AllClose

Related Products

Related Products