Schneider Electric

Schneider Electric RC2040M200SHS All in one, Homeline, CSED, ringless socket, 200A, surface mount, 20 spaces, 40 circuits, 22kA SCCR, horn bypass

(No reviews yet) Write a Review
SKU:
RC2040M200SHS
MPN:
RC2040M200SHS
Condition:
New
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Meter Socket Type:
ringless
Warranty:
18 months
Number Of Tandem Circuit Breakers:
20
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Bypass Type:
horn bypass
Circularity Profile:
N/A
Bus Rated Current:
200.0 A
Mercury Free:
Yes
Awg Gauge:
AWG 6...350 kcmil (aluminium/copper) line side || AWG 8...AWG 2/0 (aluminium/copper) service ground
Hub Type:
A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Country of Origin:
Mexico
Depth:
5.41 in
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Branch Circuit Breaker Rated Current:
200 A
Line Rated Current:
200 A
Product Or Component Type:
All-In-One
Device Composition:
service disconnect (factory installed)
Tightening Torque:
main lugs 250 lb.in, AWG 6...350 kcmil, aluminium/copper || service ground 50 lb.in, AWG 14...AWG 2/0, copper || service ground 50 lb.in, AWG 12...AWG 2/0, aluminium || branch lugs 50 lb.in, AWG 14...AWG 1/0, copper || branch lugs 50 lb.in, AWG 12...
Electrical Connection:
lugs, line side || lugs, service ground
Device Mounting:
surface
Service Disconnect Rated Current:
200 A
Service Feed Location:
UG || OH outdoor
Number Of Spaces:
20
Environmental Disclosure:
ENVPEP1407020EN
Number Of Circuits:
40
Short-Circuit Current:
22 kA
Range Of Product:
Homeline
$1,961.00

Description

Homeline ringless single phase All-In-One designed specifically for areas where local codes allow main breaker load centers for residential use to be mounted outdoors. They provide a meter socket that supports a standard utility meter, a main disconnect and load center distribution for 20 spaces and 40 circuits. This surface mounted device has UL listed rated current rating as 200A and short-circuit current 22kA. Factory installed main breaker, compact design, overhead and or underground feed, bypass type, wiring room with 6.5inch deep enclosures are ideal solution for easy installation. Knockouts above the top right-side wire gutter provides easy exit for load center wires. Factory installed blade guides on line and load meter jaws ensures proper alignment of meter blades with meter jaws to prevent meter socket damage. Forward tilted top endwall promotes water run-off to prevent pooling. All units built per ANSI C12.7, NEMA PB-1, UL standards 50, 67 and 414 and are listed in UL file number E-6294. Devices meet Federal Specifications W-P-115C for government housing. Devices meet the Electric Utility Service Equipment Requirements Committee (EUSERC) standards, meets EUSERC Requirements.
View AllClose