Schneider Electric

Schneider Electric RC816F100CH Meter mains, Homeline, CSED, ringless socket, 100A, surface mount, maximum 8 spaces, 16 circuits, horn bypass

(No reviews yet) Write a Review
SKU:
RC816F100CH
MPN:
RC816F100CH
Condition:
New
Sustainable Offer Status:
Green Premium product
Number Of Tandem Circuit Breakers:
8
Range Of Product:
Homeline
Device Mounting:
surface
Service Feed Location:
OH || UG
Warranty:
18 months
Rohs Exemption Information:
Yes
Number Of Circuits:
16
Awg Gauge:
AWG 6...350 kcmil aluminium/copper)line side || AWG 12...AWG 2/0 aluminium/copper)service ground
Circularity Profile:
N/A
Product Certifications:
UL E-6294
Tightening Torque:
main lugs 250 lb.in, AWG 6...350 kcmil, aluminium/copper || service ground 50 lb.in, AWG 14...AWG 2/0, copper || service ground 50 lb.in, AWG 12...AWG 2/0, aluminium || branch lugs 35 lb.in, AWG 6...AWG 4, aluminium/copper || branch lugs 25 lb.in, AW
Country of Origin:
Mexico
Line Rated Current:
100 A
Device Composition:
service disconnect (factory installed)
Meter Socket Type:
ringless
Product Or Component Type:
Meter Mains
Depth:
4.67 in
Bus Rated Current:
200.0 A
Branch Circuit Breaker Rated Current:
100 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Bypass Type:
horn bypass
Hub Type:
A
Eu Rohs Directive:
Compliant with Exemptions
Network Number Of Phases:
1
Electrical Connection:
lugs, line side || feed-thru lugs, service ground
Environmental Disclosure:
ENVPEP1407020EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Short-Circuit Current:
22 kA
Mercury Free:
Yes
Service Disconnect Rated Current:
100 A
Number Of Spaces:
8
$1,227.00

Description

Homeline All In One combination service entrance devices are available with ring or ringless type meter socket designs. Devices have factory installed service disconnect(s) in most cases. Supplied with 100% branch neutrals, all unused terminals may be used for equipment grounding wires. These Homeline combination service entrance devices meet the Federal Specification W-P-115c as Type 1, Class 2 specifications. This service entrance meter main is supplied with feed thru lugs and has provisions for branch circuit breakers This Homeline combination service entrance meter main unit has a ringless meter socket with horn bypass. This unit can be feed from an overhead or underground service. The service disconnect is a QOM2100VH which has a maximum rating of 100 A. Device has a 22 kA short circuit current rating. Load center has 8 spaces which will accept up to 8 tandem Homeline circuit breakers. This unit has a NEMA 3R surface mounting enclosure that is 35.13 inches tall, 14.37 inches wide and 4.67 inches deep. The line side lugs will accept 6 AWG to 350 kcmil copper or aluminum wire. The service ground lug will accept 12 AWG to 2/0 AWG copper or aluminum wire. This Homeline combination service entrance meter main unit is UL Listed. Device meets EUSERC standards.
View AllClose

Related Products

Related Products