Schneider Electric

Schneider Electric SC1624M125F All in one, Homeline, CSED, ringed socket, 125A, semi flush mount, 16 spaces, 24 circuits, 10kA SCCR, no bypass

(No reviews yet) Write a Review
SKU:
SC1624M125F
MPN:
SC1624M125F
Condition:
New
Device Mounting:
semi flush
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Or Component Type:
All-In-One
Range Of Product:
Homeline
Eu Rohs Directive:
Compliant with Exemptions
Electrical Connection:
lugs, line side || lugs, service ground
Service Feed Location:
OH || UG
Number Of Tandem Circuit Breakers:
8
Number Of Circuits:
24
Warranty:
18 months
Device Composition:
service disconnect (factory installed)
Bypass Type:
no bypass
Hub Type:
B300 || A
Circularity Profile:
N/A
Number Of Spaces:
16
Awg Gauge:
AWG 6...AWG 2/0 (aluminium) line side || AWG 6...AWG 2/0 (copper) line side || AWG 6...AWG 2/0 (aluminium) service ground || AWG 6...AWG 2/0 (copper) service ground
Depth:
3.40 in
Rohs Exemption Information:
Yes
Country of Origin:
Mexico
Line Rated Current:
125 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Branch Circuit Breaker Rated Current:
110 A
Meter Socket Type:
ringed
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1407020EN
Short-Circuit Current:
10 kA
Tightening Torque:
main lugs 50 lb.in, AWG 6...AWG 2/0, aluminium/copper || service ground 50 lb.in, AWG 6...AWG 2/0, aluminium/copper || branch lugs 35 lb.in, AWG 6...AWG 4, aluminium/copper || branch lugs 25 lb.in, AWG 8, aluminium/copper || branch lugs 20 lb.in, AWG
Sustainable Offer Status:
Green Premium product
Bus Rated Current:
125.0 A
Service Disconnect Rated Current:
125 A
$1,518.00

Description

Homeline ring type single phase All-In-One designed specifically for areas where local codes allow main breaker load centers for residential use to be mounted outdoors. They provide a meter socket that supports a standard utility meter, a main disconnect and load center distribution for 16 spaces and 24 circuits. This semiflush mounted device has UL listed rated current rating as 125A and short-circuit current 10kA. Factory installed main breaker, compact design, overhead and or underground feed, wiring room with 6.5inch deep enclosures are ideal solution for easy installation. Knockouts above the top right-side wire gutter provides easy exit for load center wires. Factory installed blade guides on line and load meter jaws ensures proper alignment of meter blades with meter jaws to prevent meter socket damage. Forward tilted top endwall promotes water run-off to prevent pooling. All units built per ANSI C12.7, NEMA PB-1, UL standards 50, 67 and 414 and are listed in UL file number E-6294. Devices meet Federal Specifications W-P-115C for government housing. Devices meet the Electric Utility Service Equipment Requirements Committee (EUSERC) standards, meets EUSERC Requirements.
View AllClose

Related Products

Related Products