Schneider Electric

Schneider Electric SC2040M125PF All in one, Homeline, combination service entrance, ringed socket, 125A, semi flush, 20 spaces, 40 circuits, 10kA SSCR, OH, UG, no bypass, solar ready

(No reviews yet) Write a Review
SKU:
SC2040M125PF
MPN:
SC2040M125PF
Condition:
New
Bypass Type:
no bypass
Depth:
3.40 in
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Bus Rated Current:
225.0 A
Electrical Connection:
lugs, line side || lugs, service ground
Product Compatibility:
solar ready
Colour Of Enclosure:
grey
Eu Rohs Directive:
Compliant with Exemptions
Country of Origin:
Mexico
Service Feed Location:
UG || OH outdoor
Line Rated Current:
125 A
Mercury Free:
Yes
Circularity Profile:
N/A
Product Or Component Type:
All-In-One
Rohs Exemption Information:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Meter Socket Type:
ringed
Range Of Product:
Homeline
Branch Circuit Breaker Rated Current:
110 A
Awg Gauge:
AWG 8...AWG 2/0 (aluminium/copper) service ground || AWG 4...250 kcmil (aluminium/copper) line side
Number Of Circuits:
40
Service Disconnect Rated Current:
125 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
1 phase
Connections - Terminals:
plug-on neutral
Short-Circuit Current:
22 kA
Environmental Disclosure:
ENVPEP1407020EN
Device Mounting:
semi flush (outdoor)
Number Of Tandem Circuit Breakers:
20
Tightening Torque:
main lugs 250 lb.in, AWG 4...250 kcmil, aluminium/copper || service ground 50 lb.in, AWG 14...AWG 2/0, copper || service ground 50 lb.in, AWG 12...AWG 2/0, aluminium || branch lugs 50 lb.in, AWG 14...AWG 4, copper || branch lugs 50 lb.in, AWG 12...AW
Sustainable Offer Status:
Green Premium product
Hub Type:
A-L
Number Of Spaces:
20
Device Composition:
service disconnect (factory installed)
$1,671.00

Description

Homeline All In One combination service entrance devices are available with ring or ringless type meter socket designs. Devices have factory installed service disconnect(s) in most cases. Supplied with 100% branch neutrals, all unused terminals may be used for equipment grounding wires. These Homeline combination service entrance devices meet the Federal Specification W-P-115c as Type 1, Class 2 specifications. This Homeline All In One combination service entrance device has a ringed meter socket with no bypass. This unit can be feed from an overhead service with the addition of tunnel kit (SCTKP20) or underground service. The service disconnect has a QOM2125VH with a maximum rating of 125 A. Device has a 22 kA short circuit current rating. Load center has 20 spaces which will accept up to 20 tandem Homeline circuit breakers. This unit has a NEMA 3R semi flush mount enclosure that is 39.80 inches tall, 16.80 inches wide and 3.40 inches deep. The line side lugs will accept 4 AWG to 250 kcmil copper or aluminum wire. The service ground lug will accept 8 AWG to 2/0 AWG copper or aluminum wire. This Homeline All In One combination service entrance meter main unit is UL Listed. Device meets EUSERC standards.
View AllClose

Related Products

Related Products