Schneider Electric SH30551P01A1000 servo motor SH3 055 0,42Nm,no key,single,no brake,str. conn,IP54/IP65,9k RPM
SKU:
SH30551P01A1000
UPC:
MPN:
SH30551P01A1000
Condition:
New
Motor Flange Size:
55 mm
Shaft End:
smooth shaft
Stator Inductance:
108.72 mH
Back Emf Constant:
40 V/krpm 20°C
Shaft Length:
20 mm
Mercury Free:
Yes
Stator Resistance:
41.8 Ohm
Nominal Torque:
0.5 N.m 115 V single phase || 0.5 N.m 230 V single phase || 0.35 N.m 400 V three phase || 0.35 N.m 480 V three phase
Maximum Current Irms:
2.9 A
Nominal Speed:
9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 230 V single phase || 8000 rpm 400 V three phase
Environmental Disclosure:
ENVPEP111049EN
Range Compatibility:
PacDrive 3
Phase:
three phase
Maximum Radial Force Fr:
340 N 1000 rpm || 270 N 2000 rpm || 240 N 3000 rpm || 220 N 4000 rpm || 200 N 5000 rpm || 190 N 6000 rpm || 180 N 7000 rpm || 170 N 8000 rpm
China Rohs Regulation:
X
Encoder Type:
absolute single turn SinCos Hiperface
Maximum Mechanical Speed:
9000 rpm
Peak Stall Torque:
1.5 N.m 115...480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weight:
1.2 kg
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Holding Brake:
without
Centring Collar Diameter:
40 mm
[Us] Rated Supply Voltage:
115...480 V
Shaft Diameter:
9 mm
Centring Collar Depth:
2 mm
Number Of Motor Poles:
3
Speed Feedback Resolution:
128 periods
Pvc Free:
Yes
Nominal Output Power:
100 W 115 V single phase || 210 W 230 V single phase || 400 W 400 V three phase || 440 W 480 V three phase
Rohs Exemption Information:
Yes
Electrical Connection:
rotatable right angled connector
Continuous Stall Torque:
0.42 N.m 115...480 V three phase
Continuous Power:
290 W
Country of Origin:
United States
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Warranty:
18 months
Rotor Inertia:
0.059 kg.cm²
Product Or Component Type:
servo motor
Mounting Holes Diameter:
5.5 mm
Device Short Name:
SH3.....P
Circle Diameter Of The Mounting Holes:
63 mm
Continuous Stall Current:
0.73 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
