Schneider Electric SH30551P01A2000 servo motor SH3 055 0,42Nm,no key,single,no brake,90°conn.IP54/IP65,9k RPM
SKU:
SH30551P01A2000
UPC:
MPN:
SH30551P01A2000
Condition:
New
Phase:
three phase
Shaft Length:
20 mm
Product Or Component Type:
servo motor
Holding Brake:
without
Mounting Holes Diameter:
5.5 mm
Stator Resistance:
41.8 Ohm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Back Emf Constant:
40 V/krpm 20°C
Sustainable Offer Status:
Green Premium product
Continuous Stall Torque:
0.42 N.m 115...480 V three phase
China Rohs Regulation:
X
Maximum Current Irms:
2.9 A
Rotor Inertia:
0.059 kg.cm²
Torque Constant:
0.58 N.m/A 120°C
Country of Origin:
United States
Peak Stall Torque:
1.5 N.m 115...480 V three phase
Nominal Output Power:
100 W 115 V single phase || 210 W 230 V single phase || 400 W 400 V three phase || 440 W 480 V three phase
Pvc Free:
Yes
Circle Diameter Of The Mounting Holes:
63 mm
Encoder Type:
absolute single turn SinCos Hiperface
Rohs Exemption Information:
Yes
Nominal Torque:
0.5 N.m 115 V single phase || 0.5 N.m 230 V single phase || 0.35 N.m 400 V three phase || 0.35 N.m 480 V three phase
Device Short Name:
SH3.....P
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Radial Force Fr:
340 N 1000 rpm || 270 N 2000 rpm || 240 N 3000 rpm || 220 N 4000 rpm || 200 N 5000 rpm || 190 N 6000 rpm || 180 N 7000 rpm || 170 N 8000 rpm
[Us] Rated Supply Voltage:
115...480 V
Centring Collar Depth:
2 mm
Circularity Profile:
N/A
Centring Collar Diameter:
40 mm
Maximum Mechanical Speed:
9000 rpm
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Maximum Axial Force Fa:
40 N
Stator Inductance:
108.72 mH
Weight:
1.2 kg
Number Of Mounting Holes:
4
Mercury Free:
Yes
Type Of Cooling:
natural convection
Shaft Diameter:
9 mm
Range Compatibility:
PacDrive 3
Continuous Stall Current:
0.73 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Speed Feedback Resolution:
128 periods
Net Weight:
1.2 kg
Continuous Power:
290 W
Mounting Support:
international standard flange
Nominal Speed:
9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 230 V single phase || 8000 rpm 400 V three phase