Schneider Electric SH30551P02A2100 servo motor SH3 055 0,42Nm,nokey,multi,nobrake,90°conn.IP65/IP65,9k RPM
SKU:
SH30551P02A2100
UPC:
MPN:
SH30551P02A2100
Condition:
New
Rohs Exemption Information:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
40 V/krpm 20°C
Stator Inductance:
108.72 mH
Number Of Mounting Holes:
4
Product Or Component Type:
servo motor
Encoder Type:
absolute multiturn SinCos Hiperface
Speed Feedback Resolution:
128 periods
Maximum Current Irms:
2.9 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circle Diameter Of The Mounting Holes:
63 mm
Nominal Output Power:
100 W 115 V single phase || 210 W 230 V single phase || 400 W 400 V three phase || 440 W 480 V three phase
Country of Origin:
United States
Phase:
three phase
Number Of Motor Poles:
3
Centring Collar Depth:
2 mm
Peak Stall Torque:
1.5 N.m 115...480 V three phase
Shaft Length:
20 mm
Warranty:
18 months
Centring Collar Diameter:
40 mm
Shaft End:
smooth shaft
Pvc Free:
Yes
Motor Flange Size:
55 mm
Environmental Disclosure:
ENVPEP111049EN
Net Weight:
1.2 kg
Mounting Support:
international standard flange
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
115...480 V
Torque Constant:
0.58 N.m/A 120°C
Continuous Stall Torque:
0.42 N.m 115...480 V three phase
Continuous Power:
290 W
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Resistance:
41.8 Ohm
Mercury Free:
Yes
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Maximum Mechanical Speed:
9000 rpm
Electrical Connection:
rotatable right angled connector
Range Compatibility:
PacDrive 3
Shaft Diameter:
9 mm
Type Of Cooling:
natural convection
Rotor Inertia:
0.059 kg.cm²
Maximum Axial Force Fa:
40 N
Nominal Speed:
9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 230 V single phase || 8000 rpm 400 V three phase
Nominal Torque:
0.5 N.m 115 V single phase || 0.5 N.m 230 V single phase || 0.35 N.m 400 V three phase || 0.35 N.m 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and smooth shaft end without...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and parallel key shaft end...
