Schneider Electric SH30551P02F2100 servo motor SH3 055 0,42Nm,nokey,multi,brake,90°conn.IP65/IP65,9k RPM
SKU:
SH30551P02F2100
UPC:
MPN:
SH30551P02F2100
Condition:
New
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Maximum Axial Force Fa:
40 N
Maximum Current Irms:
2.9 A
Continuous Stall Current:
0.73 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
SH3.....P
Number Of Motor Poles:
3
Back Emf Constant:
40 V/krpm 20°C
Phase:
three phase
Net Weight:
1.3 kg
Type Of Cooling:
natural convection
Mercury Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Torque:
0.8 N.m
Stator Resistance:
41.8 Ohm
Country of Origin:
United States
Encoder Type:
absolute multiturn SinCos Hiperface
Torque Constant:
0.58 N.m/A 120°C
Continuous Power:
290 W
Circularity Profile:
N/A
Rotor Inertia:
0.08 kg.cm²
Nominal Output Power:
100 W 115 V single phase || 210 W 230 V single phase || 400 W 400 V three phase || 440 W 480 V three phase
Nominal Torque:
0.5 N.m 115 V single phase || 0.5 N.m 230 V single phase || 0.35 N.m 400 V three phase || 0.35 N.m 480 V three phase
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
115...480 V
Range Compatibility:
PacDrive 3
Speed Feedback Resolution:
128 periods
Product Or Component Type:
servo motor
Continuous Stall Torque:
0.42 N.m 115...480 V three phase
Circle Diameter Of The Mounting Holes:
63 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Length:
159 mm
Stator Inductance:
108.72 mH
Weight:
1.3 kg
Motor Flange Size:
55 mm
Shaft Diameter:
9 mm
Environmental Disclosure:
ENVPEP111049EN
Centring Collar Depth:
2 mm
Maximum Mechanical Speed:
9000 rpm
Nominal Speed:
9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 230 V single phase || 8000 rpm 400 V three phase
Warranty:
18 months
Centring Collar Diameter:
40 mm
Shaft Length:
20 mm
Shaft End:
smooth shaft
Mounting Holes Diameter:
5.5 mm
Electrical Connection:
rotatable right angled connector
Peak Stall Torque:
1.5 N.m 115...480 V three phase
Pvc Free:
Yes
Maximum Radial Force Fr:
340 N 1000 rpm || 270 N 2000 rpm || 240 N 3000 rpm || 220 N 4000 rpm || 200 N 5000 rpm || 190 N 6000 rpm || 180 N 7000 rpm || 170 N 8000 rpm
