Schneider Electric SH30551P11F2000 servo motor SH3 055 0,42Nm,key,single,brake,90°conn.IP54/IP65,9k RPM
SKU:
SH30551P11F2000
UPC:
MPN:
SH30551P11F2000
Condition:
New
Product Or Component Type:
servo motor
Width:
3 mm
Sustainable Offer Status:
Green Premium product
Country of Origin:
United States
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
40 V/krpm 20°C
Encoder Type:
absolute single turn SinCos Hiperface
Weight:
1.3 kg
Electrical Connection:
straight connector
Peak Stall Torque:
1.5 N.m 115...480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Diameter:
40 mm
Circle Diameter Of The Mounting Holes:
63 mm
Number Of Motor Poles:
3
Shaft End:
parallel key
Shaft Diameter:
9 mm
Holding Brake:
with
Key Width:
3 mm
Rotor Inertia:
0.08 kg.cm²
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Mounting Support:
international standard flange
Nominal Speed:
2000 rpm 115 V single phase || 8000 rpm 230 V single phase || 8000 rpm 400 V three phase
Circularity Profile:
N/A
Phase:
three phase
Motor Flange Size:
55 mm
Continuous Stall Current:
0.73 A
Maximum Mechanical Speed:
9000 rpm
Maximum Current Irms:
2.9 A
Centring Collar Depth:
2 mm
Nominal Torque:
0.5 N.m 115 V single phase || 0.5 N.m 230 V single phase || 0.35 N.m 400 V three phase || 0.35 N.m 480 V three phase
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mounting Holes Diameter:
5.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
0.42 N.m 115...480 V three phase
Stator Resistance:
41.8 Ohm
Type Of Cooling:
natural convection
Maximum Axial Force Fa:
40 N
Device Short Name:
SH3.....P
Continuous Power:
290 W
Stator Inductance:
108.72 mH
Maximum Radial Force Fr:
340 N 1000 rpm || 270 N 2000 rpm || 240 N 3000 rpm || 220 N 4000 rpm || 200 N 5000 rpm || 190 N 6000 rpm || 180 N 7000 rpm || 170 N 8000 rpm
