Schneider Electric SH30701P11F2000 servo motor SH3 070 1,25Nm,key,single,brake,90°conn.IP54/IP65,8k RPM
SKU:
SH30701P11F2000
UPC:
MPN:
SH30701P11F2000
Condition:
New
Mounting Holes Diameter:
5.5 mm
Holding Torque:
3 N.m
Rotor Inertia:
0.322 kg.cm²
Phase:
three phase
Environmental Disclosure:
ENVPEP111049EN
Key Width:
4 mm
Stator Inductance:
60.25 mH
Mounting Support:
international standard flange
Shaft Diameter:
11 mm
Warranty:
18 months
Holding Brake:
with
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Country of Origin:
United States
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Maximum Mechanical Speed:
8000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Torque Constant:
0.69 N.m/A 120°C
Maximum Current Irms:
5.7 A
Centring Collar Diameter:
60 mm
Maximum Axial Force Fa:
80 N
Number Of Mounting Holes:
4
Motor Flange Size:
70 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
128 periods
[Us] Rated Supply Voltage:
115...480 V
Electrical Connection:
straight connector
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Current:
1.8 A
Type Of Cooling:
natural convection
Continuous Power:
690 W
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Encoder Type:
absolute single turn SinCos Hiperface
Shaft End:
parallel key
Stator Resistance:
10.4 Ohm
Nominal Torque:
1.4 N.m 115 V single phase || 1.4 N.m 230 V single phase || 1.1 N.m 400 V three phase || 1.1 N.m 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end with...
