Schneider Electric SH30701P12F2000 servo motor SH3 070 1,25Nm,key,multi,brake,90°conn.IP54/IP65,8k RPM
SKU:
SH30701P12F2000
UPC:
MPN:
SH30701P12F2000
Condition:
New
Type Of Cooling:
natural convection
Mercury Free:
Yes
Centring Collar Diameter:
60 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Back Emf Constant:
46 V/krpm 20°C
Maximum Axial Force Fa:
80 N
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Motor Flange Size:
70 mm
Length:
179.5 mm
Country of Origin:
United States
Mounting Support:
international standard flange
Circularity Profile:
N/A
Electrical Connection:
straight connector
Nominal Output Power:
220 W 115 V single phase || 440 W 230 V single phase || 820 W 400 V three phase || 950 W 480 V three phase
Number Of Mounting Holes:
4
[Us] Rated Supply Voltage:
115...480 V
Circle Diameter Of The Mounting Holes:
82 mm
Width:
4 mm
Maximum Current Irms:
5.7 A
Range Compatibility:
PacDrive 3
Holding Brake:
with
Shaft Length:
23 mm
Weight:
2.3 kg
Shaft Diameter:
11 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor
Centring Collar Depth:
2.5 mm
Stator Inductance:
60.25 mH
Device Short Name:
SH3.....P
Maximum Mechanical Speed:
8000 rpm
Holding Torque:
3 N.m
Sustainable Offer Status:
Green Premium product
Torque Constant:
0.69 N.m/A 120°C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Speed Feedback Resolution:
128 periods
China Rohs Regulation:
X
Stator Resistance:
10.4 Ohm
Net Weight:
2.3 kg
Number Of Motor Poles:
3
Environmental Disclosure:
ENVPEP111049EN
Rohs Exemption Information:
Yes
Rotor Inertia:
0.322 kg.cm²
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Mounting Holes Diameter:
5.5 mm
Continuous Power:
690 W
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end with...
