Schneider Electric SH30702P12F2100 servo motor SH3 070 2,04Nm,key,multi,brake,90°conn.IP65/IP65,8k RPM
SKU:
SH30702P12F2100
UPC:
MPN:
SH30702P12F2100
Condition:
New
Centring Collar Diameter:
60 mm
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP111049EN
Stator Resistance:
4.2 Ohm
Country of Origin:
United States
Electrical Connection:
straight connector
Phase:
three phase
Shaft Diameter:
11 mm
Device Short Name:
SH3.....P
Motor Flange Size:
70 mm
Key Width:
4 mm
Continuous Stall Torque:
2.04 N.m 115...480 V three phase
[Us] Rated Supply Voltage:
115...480 V
Weight:
3 kg
Maximum Axial Force Fa:
80 N
Circularity Profile:
N/A
Range Compatibility:
PacDrive 3
Back Emf Constant:
48 V/krpm 20°C
China Rohs Regulation:
X
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Continuous Stall Current:
2.9 A
Number Of Motor Poles:
3
Nominal Torque:
2.15 N.m 115 V single phase || 2.1 N.m 230 V single phase || 1.8 N.m 400 V three phase || 1.8 N.m 480 V three phase
Mounting Support:
international standard flange
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Speed Feedback Resolution:
128 periods
Holding Torque:
3 N.m
Holding Brake:
with
Encoder Type:
absolute multiturn SinCos Hiperface
Peak Stall Torque:
7.6 N.m 115...480 V three phase
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Torque Constant:
0.7 N.m/A 120°C
Stator Inductance:
29.65 mH
Warranty:
18 months
Maximum Current Irms:
11.8 A
Maximum Mechanical Speed:
8000 rpm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Centring Collar Depth:
2.5 mm
Continuous Power:
1130 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
