Schneider Electric SH30703P01F2000 servo motor SH3 070, 2,94Nm, no key, single, brake, 90°conn, IP54, IP65, 8k RPM
SKU:
SH30703P01F2000
UPC:
MPN:
SH30703P01F2000
Condition:
New
Environmental Disclosure:
ENVPEP111049EN
Maximum Current Irms:
17 A
Mounting Holes Diameter:
5.5 mm
Continuous Power:
1330 W
Centring Collar Depth:
2.5 mm
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Product Or Component Type:
servo motor
Mercury Free:
Yes
Maximum Mechanical Speed:
8000 rpm
Number Of Motor Poles:
3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Electrical Connection:
straight connector
Rohs Exemption Information:
Yes
Type Of Cooling:
natural convection
Shaft End:
smooth shaft
Device Short Name:
SH3.....P
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Holding Brake:
with
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Country of Origin:
United States
China Rohs Regulation:
X
Maximum Axial Force Fa:
80 N
Torque Constant:
0.72 N.m/A 120°C
Pvc Free:
Yes
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Centring Collar Diameter:
60 mm
Encoder Type:
absolute single turn SinCos Hiperface
Warranty:
18 months
Shaft Length:
30 mm
Range Compatibility:
PacDrive 3
Holding Torque:
3 N.m
Rotor Inertia:
0.807 kg.cm²
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Stator Resistance:
2.7 Ohm
[Us] Rated Supply Voltage:
115...480 V
Continuous Stall Current:
4.1 A
Weight:
3.8 kg
Speed Feedback Resolution:
128 periods
Mounting Support:
international standard flange
Net Weight:
3.8 kg
Stator Inductance:
20.3 mH
Motor Flange Size:
70 mm
Circularity Profile:
N/A
Shaft Diameter:
14 mm
Phase:
three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end with...
