Schneider Electric SH30703P01F2100 servo motor SH3 070, 2,94Nm, no key, single, brake, 90°conn, IP65, IP65, 8k RPM
SKU:
SH30703P01F2100
UPC:
MPN:
SH30703P01F2100
Condition:
New
Electrical Connection:
straight connector
Sustainable Offer Status:
Green Premium product
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
[Us] Rated Supply Voltage:
115...480 V
Country of Origin:
United States
Rotor Inertia:
0.807 kg.cm²
Maximum Axial Force Fa:
80 N
Centring Collar Depth:
2.5 mm
Continuous Stall Current:
4.1 A
Device Short Name:
SH3.....P
Centring Collar Diameter:
60 mm
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Maximum Current Irms:
17 A
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Speed Feedback Resolution:
128 periods
Pvc Free:
Yes
Range Compatibility:
PacDrive 3
Weight:
3.8 kg
Back Emf Constant:
49 V/krpm 20°C
Shaft Diameter:
14 mm
Phase:
three phase
Stator Resistance:
2.7 Ohm
Number Of Motor Poles:
3
Number Of Mounting Holes:
4
Motor Flange Size:
70 mm
Torque Constant:
0.72 N.m/A 120°C
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Shaft End:
smooth shaft
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Circle Diameter Of The Mounting Holes:
82 mm
Encoder Type:
absolute single turn SinCos Hiperface
Mounting Support:
international standard flange
Holding Brake:
with
Shaft Length:
30 mm
Stator Inductance:
20.3 mH
Mercury Free:
Yes
Holding Torque:
3 N.m
Continuous Power:
1330 W
Maximum Mechanical Speed:
8000 rpm
Mounting Holes Diameter:
5.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with...
