Schneider Electric

Schneider Electric SH30703P12F2000 servo motor SH3 070 2,94Nm,key,multi,brake,90°conn.IP54/IP65,8k RPM

(No reviews yet) Write a Review
SKU:
SH30703P12F2000
MPN:
SH30703P12F2000
Condition:
New
Maximum Axial Force Fa:
80 N
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Range Compatibility:
PacDrive 3
Continuous Power:
1330 W
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Electrical Connection:
rotatable right angled connector
Country of Origin:
United States
Circularity Profile:
N/A
Number Of Motor Poles:
3
Back Emf Constant:
49 V/krpm 20°C
Maximum Current Irms:
17 A
Continuous Stall Current:
4.1 A
Holding Brake:
with
Environmental Disclosure:
ENVPEP111049EN
Centring Collar Diameter:
60 mm
China Rohs Regulation:
X
Maximum Mechanical Speed:
8000 rpm
Phase:
three phase
Net Weight:
3.8 kg
Stator Resistance:
2.7 Ohm
Mounting Support:
international standard flange
Product Or Component Type:
servo motor
Shaft End:
parallel key
Centring Collar Depth:
2.5 mm
Warranty:
18 months
[Us] Rated Supply Voltage:
115...480 V
Width:
5 mm
Sustainable Offer Status:
Green Premium product
Weight:
3.8 kg
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Motor Flange Size:
70 mm
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Circle Diameter Of The Mounting Holes:
82 mm
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Number Of Mounting Holes:
4
Rotor Inertia:
0.807 kg.cm²
Encoder Type:
absolute multiturn SinCos Hiperface
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
128 periods
Holding Torque:
3 N.m
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Mounting Holes Diameter:
5.5 mm
Torque Constant:
0.72 N.m/A 120°C
Stator Inductance:
20.3 mH
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Mercury Free:
Yes
$1,994.50

Description

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end with holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 4.1A and a continuous power of 1330W. The shaft dimensions are 14mm (diameter) x 30mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 and IP65 rated product. The length of this product is 254mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 3.8kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.
View AllClose