Schneider Electric SH31001P02A1200 servo motor SH3 100 2,94Nm,nokey,multi,nobrake,str.conn,IP65/IP67,6k RPM
SKU:
SH31001P02A1200
UPC:
MPN:
SH31001P02A1200
Condition:
New
Shaft End:
smooth shaft
Centring Collar Diameter:
95 mm
Nominal Output Power:
410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Length:
40 mm
Net Weight:
4.3 kg
Encoder Type:
absolute multiturn SinCos Hiperface
Peak Stall Torque:
9.6 N.m 115...480 V three phase
Speed Feedback Resolution:
128 periods
Electrical Connection:
rotatable right angled connector
Continuous Stall Current:
3.5 A
Number Of Motor Poles:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Axial Force Fa:
160 N
Number Of Mounting Holes:
4
Motor Flange Size:
100 mm
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Warranty:
18 months
Device Short Name:
SH3.....P
Sustainable Offer Status:
Green Premium product
Continuous Power:
1190 W
Pvc Free:
Yes
Mercury Free:
Yes
Maximum Mechanical Speed:
6000 rpm
Holding Brake:
without
Rotor Inertia:
1.4 kg.cm²
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Circle Diameter Of The Mounting Holes:
115 mm
Circularity Profile:
N/A
Stator Resistance:
3.8 Ohm
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Centring Collar Depth:
3.5 mm
Stator Inductance:
27.15 mH
Mounting Holes Diameter:
9.0 mm
Torque Constant:
0.84 N.m/A 120°C
Environmental Disclosure:
ENVPEP111049EN
Nominal Torque:
2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
Weight:
4.3 kg
Type Of Cooling:
natural convection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
