Schneider Electric SH31001P02A2200 servo motor SH3 100 2,94Nm,nokey,multi,nobrake,90°conn.IP65/IP67,6k RPM
SKU:
SH31001P02A2200
UPC:
MPN:
SH31001P02A2200
Condition:
New
Environmental Disclosure:
ENVPEP111049EN
Stator Inductance:
27.15 mH
Centring Collar Depth:
3.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Brake:
without
Shaft Diameter:
19 mm
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Centring Collar Diameter:
95 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weight:
4.3 kg
Nominal Torque:
2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
Country of Origin:
United States
Continuous Stall Current:
3.5 A
China Rohs Regulation:
X
Net Weight:
4.3 kg
Product Or Component Type:
servo motor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Encoder Type:
absolute multiturn SinCos Hiperface
Back Emf Constant:
60 V/krpm 20°C
Peak Stall Torque:
9.6 N.m 115...480 V three phase
Phase:
three phase
Mercury Free:
Yes
[Us] Rated Supply Voltage:
115...480 V
Circularity Profile:
N/A
Motor Flange Size:
100 mm
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
160 N
Continuous Power:
1190 W
Maximum Mechanical Speed:
6000 rpm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Electrical Connection:
straight connector
Range Compatibility:
PacDrive 3
Mounting Holes Diameter:
9.0 mm
Shaft End:
smooth shaft
Number Of Motor Poles:
4
Pvc Free:
Yes
Shaft Length:
40 mm
Rohs Exemption Information:
Yes
Nominal Output Power:
410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
Rotor Inertia:
1.4 kg.cm²
Maximum Current Irms:
0
Circle Diameter Of The Mounting Holes:
115 mm
Torque Constant:
0.84 N.m/A 120°C
Device Short Name:
SH3.....P
Stator Resistance:
3.8 Ohm
Mounting Support:
international standard flange
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
