Schneider Electric SH31002P01A1200 servo motor SH3 100 5,8Nm,nokey,single,nobrake,str.conn,IP65/IP67,6k RPM
SKU:
SH31002P01A1200
UPC:
MPN:
SH31002P01A1200
Condition:
New
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
Number Of Mounting Holes:
4
Product Or Component Type:
servo motor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
Type Of Cooling:
natural convection
Continuous Power:
1900 W
Back Emf Constant:
77 V/krpm 20°C
Motor Flange Size:
100 mm
Sustainable Offer Status:
Green Premium product
Speed Feedback Resolution:
128 periods
Circularity Profile:
N/A
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Device Short Name:
SH3.....P
Range Compatibility:
PacDrive 3
Mounting Holes Diameter:
9.0 mm
[Us] Rated Supply Voltage:
115...480 V
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Mounting Support:
international standard flange
Stator Inductance:
19.5 mH
Rotor Inertia:
2.31 kg.cm²
China Rohs Regulation:
X
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Nominal Output Power:
580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
Stator Resistance:
2.4 Ohm
Warranty:
18 months
Holding Brake:
without
Phase:
three phase
Shaft Diameter:
19 mm
Shaft Length:
40 mm
Number Of Motor Poles:
4
Maximum Axial Force Fa:
160 N
Environmental Disclosure:
ENVPEP111049EN
Centring Collar Depth:
3.5 mm
Shaft End:
smooth shaft
Weight:
5.8 kg
Centring Collar Diameter:
95 mm
Net Weight:
5.8 kg
Maximum Mechanical Speed:
6000 rpm
Electrical Connection:
rotatable right angled connector
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
