Schneider Electric SH31002P11A1200 servo motor SH3 100 5,8Nm,key,single,nobrake,str.conn,IP65/IP67,6k RPM
SKU:
SH31002P11A1200
UPC:
MPN:
SH31002P11A1200
Condition:
New
Rotor Inertia:
2.31 kg.cm²
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Mounting Holes Diameter:
9.0 mm
Mounting Support:
international standard flange
Back Emf Constant:
77 V/krpm 20°C
Warranty:
18 months
Key Width:
6 mm
Motor Flange Size:
100 mm
Number Of Mounting Holes:
4
Torque Constant:
1.21 N.m/A 120°C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
without
Environmental Disclosure:
ENVPEP111049EN
Pvc Free:
Yes
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Circularity Profile:
N/A
Maximum Mechanical Speed:
6000 rpm
Country of Origin:
United States
Centring Collar Depth:
3.5 mm
Centring Collar Diameter:
95 mm
Product Or Component Type:
servo motor
Range Compatibility:
PacDrive 3
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Shaft Diameter:
19 mm
Length:
204.5 mm
Net Weight:
5.8 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Circle Diameter Of The Mounting Holes:
115 mm
[Us] Rated Supply Voltage:
115...480 V
Continuous Stall Current:
4.8 A
Encoder Type:
absolute single turn SinCos Hiperface
Stator Resistance:
2.4 Ohm
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
Shaft Length:
40 mm
Speed Feedback Resolution:
128 periods
Electrical Connection:
rotatable right angled connector
Width:
6 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Inductance:
19.5 mH
Maximum Axial Force Fa:
160 N
Phase:
three phase
Weight:
5.8 kg
Shaft End:
parallel key
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
Continuous Power:
1900 W
Number Of Motor Poles:
4
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
