Schneider Electric SH31003P11F2100 servo motor SH3 100 8Nm,key,single,brake,90°conn.IP65/IP65,6k RPM
SKU:
SH31003P11F2100
UPC:
MPN:
SH31003P11F2100
Condition:
New
Torque Constant:
1.22 N.m/A 120°C
Key Width:
6 mm
Net Weight:
8 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
128 periods
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm
Circularity Profile:
N/A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Holding Brake:
with
Pvc Free:
Yes
Electrical Connection:
straight connector
Maximum Mechanical Speed:
6000 rpm
Shaft Length:
40 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
77 V/krpm 20°C
Device Short Name:
SH3.....P
Environmental Disclosure:
ENVPEP111049EN
Rotor Inertia:
3.838 kg.cm²
Shaft End:
parallel key
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Diameter:
19 mm
Stator Inductance:
13.45 mH
Width:
6 mm
Continuous Stall Torque:
8 N.m 115...480 V three phase
Weight:
8 kg
Stator Resistance:
1.43 Ohm
Centring Collar Depth:
3.5 mm
Motor Flange Size:
100 mm
Type Of Cooling:
natural convection
Range Compatibility:
PacDrive 3
Mercury Free:
Yes
Sustainable Offer Status:
Green Premium product
Mounting Support:
international standard flange
Length:
271.5 mm
Circle Diameter Of The Mounting Holes:
115 mm
Nominal Torque:
5.1 N.m 480 V three phase || 7.5 N.m 115 V single phase || 7 N.m 230 V single phase || 5.7 N.m 400 V three phase
