Schneider Electric SH31004P02F2200 servo motor SH3 100 10Nm,nokey,multi,brake,90°conn.IP65/IP67,6k RPM
SKU:
SH31004P02F2200
UPC:
MPN:
SH31004P02F2200
Condition:
New
Sustainable Offer Status:
Green Premium product
Peak Stall Torque:
40.5 N.m 115...480 V three phase
Country of Origin:
United States
[Us] Rated Supply Voltage:
115...480 V
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Power:
2500 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
international standard flange
Stator Resistance:
1.81 Ohm
Maximum Axial Force Fa:
160 N
Continuous Stall Torque:
10 N.m 115...480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Disclosure:
ENVPEP111049EN
Phase:
three phase
Centring Collar Diameter:
95 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Torque:
12 N.m
Warranty:
18 months
Shaft Length:
50 mm
Electrical Connection:
rotatable right angled connector
Continuous Stall Current:
6.2 A
Circle Diameter Of The Mounting Holes:
115 mm
Centring Collar Depth:
3.5 mm
Rotor Inertia:
5.245 kg.cm²
Nominal Output Power:
780 W 115 V single phase || 1490 W 230 V single phase || 2480 W 400 V three phase || 2600 W 480 V three phase
China Rohs Regulation:
X
Maximum Radial Force Fr:
1070 N 1000 rpm || 850 N 2000 rpm || 740 N 3000 rpm
Shaft Diameter:
24 mm
Nominal Torque:
9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Torque Constant:
1.62 N.m/A 120°C
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
