Schneider Electric SH31004P11F2000 servo motor SH3 100 10Nm,key,single,brake,90°conn.IP54/IP65,6k RPM
SKU:
SH31004P11F2000
UPC:
MPN:
SH31004P11F2000
Condition:
New
Continuous Stall Current:
6.2 A
Continuous Stall Torque:
10 N.m 115...480 V three phase
Environmental Disclosure:
ENVPEP111049EN
Width:
8 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Support:
international standard flange
Nominal Torque:
9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
Weight:
9.9 kg
Maximum Axial Force Fa:
160 N
Phase:
three phase
Centring Collar Diameter:
95 mm
Key Width:
8 mm
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Shaft End:
parallel key
Torque Constant:
1.62 N.m/A 120°C
Back Emf Constant:
103 V/krpm 20°C
Circularity Profile:
N/A
Number Of Motor Poles:
4
Warranty:
18 months
Circle Diameter Of The Mounting Holes:
115 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
X
Rohs Exemption Information:
Yes
Device Short Name:
SH3.....P
Shaft Length:
50 mm
Speed Feedback Resolution:
128 periods
Continuous Power:
2500 W
Motor Flange Size:
100 mm
Centring Collar Depth:
3.5 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor
Peak Stall Torque:
40.5 N.m 115...480 V three phase
Range Compatibility:
PacDrive 3
Nominal Output Power:
780 W 115 V single phase || 1490 W 230 V single phase || 2480 W 400 V three phase || 2600 W 480 V three phase
Number Of Mounting Holes:
4
Length:
307.5 mm
Electrical Connection:
straight connector
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Torque:
12 N.m
Encoder Type:
absolute single turn SinCos Hiperface
[Us] Rated Supply Voltage:
115...480 V
Stator Resistance:
1.81 Ohm
Maximum Radial Force Fr:
1070 N 1000 rpm || 850 N 2000 rpm || 740 N 3000 rpm
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with...
